TE1160 Aluminum Electrolytic Capacitor - Equivalent & Substitute Parts

Part Overview

The TE1160 is a 50 µF, 16 V aluminum electrolytic capacitor in axial configuration, manufactured by Vishay Sprague. This component is designed for general-purpose applications requiring polarized capacitive energy storage in through-hole mounting configurations. The part is currently active in production with 837 units in stock. Substitute parts are identified to address inventory availability, compliance requirements, or design revision needs while maintaining electrical and mechanical compatibility.

Substiute Parts

TE1160

Vishay SpragueIn Stock: 854TE1160 Datasheet

Current PartRFQ

TE1160-E3

Vishay SpragueIn Stock: 1236TE1160-E3 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TE1160 are qualified based on the following critical parameters that must remain constant:

• Capacitance value: 50 µF (exact match required)
• Voltage rating: 16 V (exact match required)
• Tolerance specification: -10%, +75% (exact match required)
• Lifetime rating: 2000 Hrs @ 85°C (exact match required)
• Operating temperature range: -40°C ~ 105°C (exact match required)
• Polarization type: Polar (exact match required)
• Package configuration: Axial, Can (exact match required)
• Mounting method: Through Hole (exact match required)
• Physical dimensions: 0.315" Dia x 0.689" L / 8.00mm x 17.50mm (exact match required)

The TE1160-E3 qualifies as a direct substitute because it maintains identical electrical specifications and mechanical form factor. The primary distinction is RoHS compliance status.

Parameter Comparison

Engineering Selection Recommendations

Both TE1160 and TE1160-E3 are electrically and mechanically interchangeable for applications requiring 50 µF, 16 V aluminum electrolytic capacitors in axial through-hole configuration.

Selection between these parts should be based on regulatory and compliance requirements:

• TE1160: Select for applications where RoHS non-compliant components are acceptable or required by design specification.
• TE1160-E3: Select for applications requiring ROHS3 compliance. This variant is preferred for new designs, consumer electronics, and markets with mandatory RoHS requirements.

Both parts maintain identical electrical performance, thermal ratings, and physical form factor. Inventory availability favors TE1160-E3 with 1156 units in stock versus 837 units for TE1160.

Frequently Asked Questions (FAQ)

Q: Can TE1160-E3 be used as a direct replacement for TE1160 in existing designs?

A: Yes. The TE1160-E3 is electrically and mechanically identical to TE1160. Both parts share the same capacitance (50 µF), voltage rating (16 V), tolerance (-10%, +75%), lifetime rating (2000 Hrs @ 85°C), operating temperature range (-40°C ~ 105°C), and physical dimensions (0.315" Dia x 0.689" L). The only difference is RoHS compliance status.

Q: What is the primary difference between TE1160 and TE1160-E3?

A: The TE1160-E3 is ROHS3 compliant, while the TE1160 is RoHS non-compliant. All other specifications, including electrical performance and physical dimensions, are identical.

Q: Are there any compatibility concerns when substituting TE1160 with TE1160-E3?

A: No compatibility concerns exist. Both parts are through-hole mounted axial capacitors with identical lead spacing, dimensions, and electrical characteristics. PCB layout and circuit design require no modification.

Q: Which part should be selected for new product designs?

A: TE1160-E3 is the recommended choice for new designs due to ROHS3 compliance and higher current inventory availability (1156 units versus 837 units).

Q: Do these parts have different thermal or lifetime characteristics?

A: No. Both TE1160 and TE1160-E3 are rated for 2000 hours at 85°C and operate across the identical temperature range of -40°C to 105°C.