TE0630-02IBF Equivalent & Substitute Parts

Part Overview

The TE0630-02IBF is an embedded FPGA module manufactured by Trenz Electronic GmbH, featuring a Spartan-6 LX-75 core processor with integrated Cypress EZ-USB FX2LP co-processor. This module operates at 100MHz with 128MB RAM and 8MB Flash storage, housed in a compact B2B connector form factor (40.50mm x 47.50mm). The product is currently in Last Time Buy status, indicating discontinued production with limited inventory availability. Identifying equivalent substitute parts is essential for design continuity, long-term supply chain planning, and new project implementations where this module is specified.

Substiute Parts

TE0630-02IBF

Trenz Electronic GmbHIn Stock: 923TE0630-02IBF Datasheet

Current PartRFQ

TE0630-03-63I22-A

Trenz Electronic GmbHIn Stock: 767TE0630-03-63I22-A Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TE0630-02IBF is determined by the following critical parameters:

Core Functional Parameters:

• FPGA core processor type and logic capacity (Spartan-6 LX-75)
• USB co-processor integration (Cypress EZ-USB FX2LP)
• Operating frequency (100MHz)
• Memory configuration (128MB RAM, 8MB Flash)

Physical & Mechanical Parameters:

• Connector interface type (B2B)
• Module form factor and dimensions (40.50mm x 47.50mm)

Compliance & Environmental Parameters:

• RoHS3 compliance status
• Operating temperature range (-40°C to 85°C)

The substitute part TE0630-03-63I22-A is classified as an equivalent based on matching core processor architecture, co-processor integration, memory specifications, and connector type. The transition from Last Time Buy status to Active product status indicates this substitute represents the current production alternative within the TE0630 series.

Parameter Comparison

Engineering Selection Recommendations

For Existing Designs Using TE0630-02IBF:

The TE0630-02IBF is designated Last Time Buy, indicating production discontinuation. Current inventory of 839 units is available; however, long-term supply cannot be guaranteed. For ongoing production requirements or design refreshes, transition to TE0630-03-63I22-A is supported by functional equivalence across all critical parameters: identical FPGA core (Spartan-6 LX-75), co-processor (Cypress EZ-USB FX2LP), memory configuration (128MB/8MB), and connector interface (B2B).

For New Designs:

TE0630-03-63I22-A is the recommended selection, as it maintains Active product status with confirmed inventory availability (673 units). This part ensures sustained supply chain support and aligns with current manufacturing standards.

Compliance Considerations:

Both parts are manufactured by Trenz Electronic GmbH and maintain compatibility with embedded FPGA module specifications. The TE0630-02IBF is confirmed ROHS3 compliant. Verification of RoHS compliance status for TE0630-03-63I22-A is recommended during procurement.

Frequently Asked Questions (FAQ)

Q: Are TE0630-02IBF and TE0630-03-63I22-A pin-compatible?

A: Both modules use B2B connector interfaces and share identical core processor (Spartan-6 LX-75), co-processor (Cypress EZ-USB FX2LP), and memory specifications. Connector compatibility is determined by B2B interface standards. Detailed pinout verification against your specific carrier board design is required.

Q: What is the difference between TE0630-02IBF and TE0630-03-63I22-A?

A: The primary difference is product lifecycle status. TE0630-02IBF is Last Time Buy (discontinued), while TE0630-03-63I22-A is Active (current production). All functional parameters—processor, co-processor, speed, memory, and connector type—are identical.

Q: Can I use TE0630-03-63I22-A as a direct replacement in existing applications?

A: Functional substitution is supported based on matching core specifications. However, physical form factor, connector pinout, and any firmware dependencies must be validated against your specific application requirements and carrier board design.

Q: Why is TE0630-02IBF in Last Time Buy status?

A: Last Time Buy designation indicates the manufacturer has discontinued this product variant. TE0630-03-63I22-A represents the current production equivalent within the TE0630 series.

Q: What should I do if I need TE0630-02IBF inventory beyond available stock?

A: Transition planning to TE0630-03-63I22-A is recommended. This substitute maintains functional equivalence and ensures long-term supply availability. Conduct design validation and testing to confirm compatibility with your specific application.

Q: Are there RoHS compliance differences between these parts?

A: TE0630-02IBF is confirmed ROHS3 compliant. RoHS compliance status for TE0630-03-63I22-A should be verified with the manufacturer or distributor during procurement to ensure regulatory alignment.