TE0600-02IVFN Equivalent & Substitute Parts

Part Overview

The TE0600-02IVFN is an embedded FPGA module manufactured by Trenz Electronic GmbH, featuring a Spartan-6 LX-150 core processor operating at 125MHz with 256MB RAM and 16MB Flash memory. This module integrates a Samtec LSHM connector interface and operates across the industrial temperature range of -40°C to 85°C.

The TE0600-02IVFN has been discontinued at DiGi Electronics. Identifying equivalent substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production or maintenance requirements for systems utilizing this embedded module.

Substiute Parts

TE0600-02IVFN

Trenz Electronic GmbHIn Stock: 795TE0600-02IVFN Datasheet

Current PartRFQ

TE0600-03-83I11-A

Trenz Electronic GmbHIn Stock: 1001TE0600-03-83I11-A Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TE0600-02IVFN are identified based on strict parametric equivalence across the following critical criteria:

Core Processor Match: Spartan-6 LX-150 FPGA architecture Speed Equivalence: 125MHz operating frequency Memory Configuration: 256MB RAM and 16MB Flash Physical Interface: Samtec LSHM connector type Thermal Compatibility: -40°C to 85°C operating range Regulatory Compliance: ROHS3 compliance and ECCN/HTSUS classification alignment

Parts meeting all these parameters are classified as direct parametric equivalents and may be substituted without modification to the host system interface or firmware configuration.

Parameter Comparison

Engineering Selection Recommendations

TE0600-03-83I11-A is the direct parametric equivalent for TE0600-02IVFN replacement applications.

Compliance Basis: Both parts maintain identical ROHS3 compliance status and REACH unaffected classification, ensuring regulatory continuity in applications subject to environmental directives.

Supply Status Advantage: TE0600-03-83I11-A maintains active product status with 966 units in current inventory, compared to the discontinued TE0600-02IVFN. This availability supports immediate procurement for new designs or legacy system maintenance.

Functional Equivalence: All electrical and mechanical parameters are identical, including FPGA core architecture, memory configuration, operating frequency, thermal range, and connector interface. No design modifications are required for direct substitution.

Export Classification: Both parts share identical ECCN (3A991D) and HTSUS (8471.50.0150) codes, ensuring consistent export compliance and tariff classification.

Frequently Asked Questions (FAQ)

Q: Can TE0600-03-83I11-A be used as a direct replacement for TE0600-02IVFN?

A: Yes. Both parts are parametrically identical across all critical specifications: Spartan-6 LX-150 processor, 125MHz speed, 256MB RAM, 16MB Flash, Samtec LSHM connector, identical physical dimensions, and -40°C to 85°C operating range. No design modifications are required.

Q: What is the difference between TE0600-02IVFN and TE0600-03-83I11-A?

A: The primary difference is product status. TE0600-02IVFN is discontinued at DiGi Electronics, while TE0600-03-83I11-A is active with current inventory availability. All functional and electrical parameters are identical.

Q: Are there any connector compatibility issues when substituting these parts?

A: No. Both parts use the identical Samtec LSHM connector type and physical dimensions (1.970" L x 1.570" W / 50.00mm x 40.00mm). Mechanical and electrical interface compatibility is guaranteed.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both TE0600-02IVFN and TE0600-03-83I11-A are ROHS3 compliant and REACH unaffected. They share identical ECCN and HTSUS classifications, ensuring equivalent regulatory and export compliance.

Q: What is the operating temperature range for both parts?

A: Both parts operate across -40°C to 85°C, supporting industrial and extended temperature applications without thermal performance variation.

Q: Is firmware or software modification required when switching to TE0600-03-83I11-A?

A: No. Identical processor architecture, memory configuration, and operating frequency eliminate the need for firmware or software changes. The substitution is transparent at the system level.