TDC600-10A Equivalent & Substitute Parts

Part Overview

The TDC600-10A is a 10-pole ceramic cartridge fuse manufactured by Eaton - Electronics Division. This component is classified as obsolete and does not comply with RoHS standards. Due to its obsolete status, identifying equivalent substitute parts is essential for system maintenance, repair, and component replacement in existing installations. The TDC600-10A requires a compatible fuse holder for operation and is designed for electrical and industrial applications.

Substiute Parts

TDC600-10A

Eaton - Electronics DivisionIn Stock: 985TDC600-10A Datasheet

Current PartRFQ

TDC600-10-R

Eaton - Electronics DivisionIn Stock: 975TDC600-10-R Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The substitute part TDC600-10-R is identified as a direct equivalent based on the following substitution criteria:

Manufacturer Continuity: Both parts are manufactured by Eaton - Electronics Division, ensuring design and performance consistency.

Series Alignment: The TDC600-10-R belongs to the TDC600 series, which is the active production line continuation of the TDC600-10A cartridge fuse family.

Electrical Specifications: The substitute maintains the same current rating (10A) and voltage rating (600 VAC), ensuring functional compatibility in the same circuit protection applications.

Form Factor Compatibility: Both parts use the 8AG cartridge format (1/4" x 1" / 6.30mm x 25.40mm), allowing installation in the same fuse holder assemblies.

Functional Classification: Both are cartridge-type fuses with fast-blow response characteristics, suitable for identical electrical and industrial applications.

Parameter Comparison

Engineering Selection Recommendations

For New Designs and Future Installations: The TDC600-10-R is the appropriate selection. This part is in active production status, carries ROHS3 compliance certification, and holds dual approval from ASTA and BSI standards organizations. These factors ensure long-term availability, regulatory compliance with modern procurement standards, and validated performance in contemporary electrical systems.

For Existing System Maintenance: The TDC600-10A remains available in current inventory (880 units). However, transition planning to the TDC600-10-R is recommended to align with RoHS compliance requirements and ensure future component availability as the TDC600-10A approaches end-of-life status.

Compliance Considerations: Organizations subject to RoHS regulations should prioritize the TDC600-10-R to maintain regulatory compliance in their bill of materials and supply chain documentation.

Frequently Asked Questions (FAQ)

Q: Can the TDC600-10-R be used as a direct replacement for the TDC600-10A in existing installations?

A: Yes. Both parts share identical current ratings (10A), voltage ratings (600 VAC), cartridge form factor (8AG), and physical dimensions (0.248" Dia x 1.000" L). They install in the same fuse holder assemblies without modification.

Q: What is the primary reason to substitute the TDC600-10A?

A: The TDC600-10A is classified as obsolete. The TDC600-10-R is the active production equivalent from the same manufacturer, ensuring continued availability and supply chain reliability.

Q: Are there compliance differences between these parts?

A: Yes. The TDC600-10A is RoHS non-compliant, while the TDC600-10-R is ROHS3 compliant. Organizations with RoHS procurement requirements must use the TDC600-10-R.

Q: Do both parts have the same breaking capacity?

A: The TDC600-10A breaking capacity is not specified in available documentation. The TDC600-10-R has a breaking capacity of 200A at rated voltage. Consult original equipment specifications to confirm breaking capacity requirements for your application.

Q: What certifications does the substitute part carry?

A: The TDC600-10-R holds approval from ASTA (Australian Standards) and BSI (British Standards Institution), providing independent validation of performance and safety characteristics.

Q: Are there packaging differences?

A: The TDC600-10A packaging is not specified. The TDC600-10-R is supplied in bulk packaging. Both parts are available in current inventory.