TC-600-NFC-BH Equivalent & Substitute Parts

Part Overview

The TC-600-NFC-BH is an N-type female jack coaxial connector manufactured by Amphenol Times Microwave Systems, designed for 50-ohm RF applications with panel mount bulkhead configuration and solder termination. This connector is classified as obsolete product status. Identifying equivalent and substitute parts is necessary to maintain system compatibility, ensure continued availability, and support ongoing procurement for legacy installations and new designs requiring this connector class.

Substiute Parts

TC-600-NFC-BH

Amphenol Times Microwave SystemsIn Stock: 1166TC-600-NFC-BH Datasheet

Current PartRFQ

EZ-600-NF-BH-X

Times Microwave SystemsIn Stock: 19147EZ-600-NF-BH-X Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TC-600-NFC-BH is determined by the following core parameters that must remain constant:

• Connector Style: N Type (mechanical and electrical interface standard)
• Connector Type: Jack, Female Socket (gender and socket configuration)
• Impedance: 50 Ohms (electrical characteristic for RF transmission)
• Mounting Type: Panel Mount with Bulkhead configuration (physical installation method)
• Cable Group: LMR-600 (cable compatibility specification)

The substitute part EZ-600-NF-BH-X maintains all these core parameters. Variations in contact termination method (solder versus push-on), shield termination approach (clamp versus crimp), frequency rating, operating temperature range, and material composition are allowable within the substitute relationship, provided the core electrical and mechanical interfaces remain compatible.

Parameter Comparison

Engineering Selection Recommendations

The EZ-600-NF-BH-X is the manufacturer-recommended substitute for the obsolete TC-600-NFC-BH. Both connectors maintain identical core electrical and mechanical specifications: N-type female jack configuration, 50-ohm impedance, panel mount bulkhead installation, and LMR-600 cable group compatibility.

The EZ-600-NF-BH-X offers enhanced specifications in several areas: extended frequency capability (8 GHz versus 2.5 GHz), wider operating temperature range (-40°C to 125°C versus -40°C to 85°C), and documented mating cycle rating (500 cycles). The substitute employs push-on contact termination and crimp shield termination in place of solder and clamp methods, representing a design evolution in connector assembly methodology.

Both parts maintain RoHS compliance status and gold-plated center contacts. The EZ-600-NF-BH-X is actively manufactured with significantly higher inventory availability (19,131 pieces versus 1,102 pieces), supporting long-term procurement reliability.

Frequently Asked Questions (FAQ)

Q: Can the EZ-600-NF-BH-X directly replace the TC-600-NFC-BH in existing installations?

A: Yes. Both connectors share identical N-type female jack configuration, 50-ohm impedance, panel mount bulkhead mounting, and LMR-600 cable group compatibility. The mechanical interface and electrical performance are equivalent for RF applications within the TC-600-NFC-BH frequency specification (2.5 GHz).

Q: What is the primary difference between these two connectors?

A: The main differences are contact termination method (solder versus push-on), shield termination approach (clamp versus crimp), and material composition of the center contact (brass versus beryllium copper). The EZ-600-NF-BH-X also provides higher frequency capability and extended operating temperature range.

Q: Does the push-on termination of the EZ-600-NF-BH-X affect compatibility with LMR-600 cable?

A: No. Both connectors are specified for LMR-600 cable group compatibility. The push-on termination method is a connector assembly technique that does not alter cable interface compatibility.

Q: Are there packaging or assembly kit differences?

A: Yes. The EZ-600-NF-BH-X includes a complete assembly kit: 1 connector, 1 gasket, 1 ferrule, 2 nuts, and 1 washer. The TC-600-NFC-BH packaging information is not specified in the provided data.

Q: Which part should be selected for new designs?

A: The EZ-600-NF-BH-X is the active product and manufacturer-recommended choice. It provides superior specifications, higher inventory availability, and ongoing manufacturing support.

Q: Are both parts RoHS compliant?

A: Yes. The TC-600-NFC-BH is RoHS Compliant. The EZ-600-NF-BH-X is ROHS3 Compliant, representing a more recent compliance standard.