TC-600-NF-BH N Type Coaxial Connector Equivalent & Substitute Parts

Part Overview

The TC-600-NF-BH is an N Type female jack coaxial connector manufactured by Amphenol Times Microwave Systems, designed for 50 Ohm RF applications with panel mount bulkhead configuration. This connector features solder contact termination and crimp shield termination, rated for operation up to 2.5 GHz and temperatures from -40°C to 85°C.

The TC-600-NF-BH is classified as obsolete. Identifying equivalent substitute parts is necessary to maintain system compatibility, ensure continued availability, and support ongoing procurement for applications utilizing this connector specification.

Substiute Parts

TC-600-NF-BH

Amphenol Times Microwave SystemsIn Stock: 1058TC-600-NF-BH Datasheet

Current PartRFQ

EZ-600-NF-BH-X

Times Microwave SystemsIn Stock: 19147EZ-600-NF-BH-X Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TC-600-NF-BH is based on the following critical parameters that must remain consistent:

• Connector Style & Type: N Type female jack configuration
• Impedance: 50 Ohms
• Mounting Configuration: Panel mount bulkhead with threaded fastening
• Cable Compatibility: LMR-600 cable group
• Electrical Performance: Frequency rating and voltage specifications

The EZ-600-NF-BH-X qualifies as a substitute based on matching these core parameters. However, differences exist in contact termination method (push on versus solder) and maximum frequency capability (8 GHz versus 2.5 GHz), which represent functional enhancements rather than incompatibilities.

Parameter Comparison

Engineering Selection Recommendations

The EZ-600-NF-BH-X is the manufacturer-recommended substitute for the obsolete TC-600-NF-BH. Both connectors maintain RoHS compliance and meet the core electrical and mechanical specifications for N Type 50 Ohm panel mount bulkhead applications with LMR-600 cable compatibility.

The EZ-600-NF-BH-X offers extended frequency capability (8 GHz versus 2.5 GHz) and wider operating temperature range (-40°C to 125°C versus -40°C to 85°C), representing performance enhancements. The primary functional difference is the contact termination method: the substitute uses push-on termination instead of solder termination. This change simplifies assembly and reduces thermal stress on the connector body.

Both parts are actively stocked and available for procurement. The EZ-600-NF-BH-X is the current production equivalent for applications requiring N Type female jack connectors in panel mount bulkhead configuration.

Frequently Asked Questions (FAQ)

Q: Can the EZ-600-NF-BH-X directly replace the TC-600-NF-BH in existing applications?

A: Yes. Both connectors share identical mounting configuration, impedance, cable group compatibility, and connector type. The EZ-600-NF-BH-X is the manufacturer-designated substitute for the obsolete TC-600-NF-BH.

Q: What is the difference between solder and push-on contact termination?

A: The TC-600-NF-BH uses solder termination, requiring thermal connection to the cable. The EZ-600-NF-BH-X uses push-on termination, which mechanically engages the cable conductor without soldering. Push-on termination reduces assembly time and eliminates thermal stress.

Q: Does the higher frequency rating of the EZ-600-NF-BH-X affect compatibility?

A: No. The EZ-600-NF-BH-X's 8 GHz maximum frequency rating is a performance enhancement. It remains fully compatible with applications designed for the TC-600-NF-BH's 2.5 GHz specification.

Q: Are there differences in packaging or included components?

A: The EZ-600-NF-BH-X is supplied in bulk packaging and includes gasket, ferrule, nuts, and washer components. Verify packaging requirements for your procurement process.

Q: Do both connectors meet the same compliance standards?

A: Both connectors are RoHS compliant. The EZ-600-NF-BH-X meets ROHS3 compliance, representing current regulatory standards. Both carry MSL Rating 1 (Unlimited) and share identical ECCN and HTSUS classifications.

Q: What is the operating temperature difference between these connectors?

A: The TC-600-NF-BH operates from -40°C to 85°C. The EZ-600-NF-BH-X extends this range to -40°C to 125°C, providing wider environmental compatibility for high-temperature applications.