TAP476K006GSB Equivalent & Substitute Parts

Part Overview

The TAP476K006GSB is a 47 µF conformal coated tantalum capacitor rated at 6.3 V with radial through-hole mounting. This component is designed for general-purpose applications requiring reliable energy storage in compact form factors. The part is currently active in production with full inventory availability. Substitute parts may be required due to lead time constraints, regional availability, or specific procurement preferences while maintaining identical electrical and mechanical performance.

Substiute Parts

TAP476K006GSB

KYOCERA AVXIn Stock: 1099TAP476K006GSB Datasheet

Current PartRFQ

TAP476K006CCS

KYOCERA AVXIn Stock: 5862TAP476K006CCS Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The TAP476K006CCS qualifies as a direct substitute for the TAP476K006GSB based on the following matching parameters:

• Capacitance: 47 µF (identical)
• Voltage Rating: 6.3 V (identical)
• Tolerance: ±10% (identical)
• Conformal Coating Type: Identical protective coating
• ESR: 2 Ohm (identical)
• Operating Temperature Range: -55°C to 125°C (identical)
• Lifetime Rating: 1000 Hrs @ 85°C (identical)
• Mounting Configuration: Through Hole Radial (identical)
• RoHS3 Compliance: Both parts meet regulatory requirements

The primary difference between these parts is the lead spacing specification, which affects PCB layout compatibility but does not impact electrical performance or functional equivalence.

Parameter Comparison

Engineering Selection Recommendations

Both TAP476K006GSB and TAP476K006CCS are active production parts from KYOCERA AVX with full ROHS3 compliance and identical electrical specifications. Selection between these parts should be based on PCB layout requirements, as the lead spacing differs (3.18mm versus 5.00mm). The TAP476K006CCS offers higher inventory availability (5799 pcs versus 1008 pcs), making it suitable for high-volume procurement scenarios where lead spacing accommodates the wider pitch design. Both parts maintain equivalent performance across all critical parameters including capacitance, voltage rating, ESR, and operating temperature range.

Frequently Asked Questions (FAQ)

Q: Are TAP476K006GSB and TAP476K006CCS electrically interchangeable?

A: Yes. Both parts have identical capacitance (47 µF), voltage rating (6.3 V), tolerance (±10%), ESR (2 Ohm), and operating temperature range (-55°C to 125°C). Electrical performance is equivalent.

Q: What is the difference between these two parts?

A: The primary difference is lead spacing. TAP476K006GSB has 0.125" (3.18mm) lead spacing, while TAP476K006CCS has 0.197" (5.00mm) lead spacing. Both use identical radial through-hole mounting with the same physical diameter and height.

Q: Can I use TAP476K006CCS as a direct replacement on existing PCBs designed for TAP476K006GSB?

A: Lead spacing compatibility must be verified against your PCB layout. The wider 5.00mm pitch of TAP476K006CCS may not fit PCB holes designed for the 3.18mm pitch of TAP476K006GSB. PCB modification may be required.

Q: Do both parts meet the same compliance standards?

A: Yes. Both TAP476K006GSB and TAP476K006CCS are ROHS3 compliant and REACH unaffected, meeting identical regulatory requirements.

Q: Which part should I select for new designs?

A: Selection depends on your PCB layout specifications. Verify lead spacing requirements against your design. Both parts are active production items with equivalent electrical performance and compliance status.