TAP475M035FCS Equivalent & Substitute Parts

Part Overview

The TAP475M035FCS is a 4.7 µF conformal coated tantalum capacitor rated for 35 V with ±20% tolerance, manufactured by KYOCERA AVX. This radial through-hole component is designed for general-purpose applications requiring reliable energy storage in compact form factors. The part is currently active in production with full ROHS3 compliance and REACH unaffected status. Substitute parts are identified when inventory constraints, tolerance requirements, or design optimization necessitate alternative part selection while maintaining electrical and mechanical compatibility.

Substiute Parts

TAP475M035FCS

KYOCERA AVXIn Stock: 896TAP475M035FCS Datasheet

Current PartRFQ

TAP475M035CCS

KYOCERA AVXIn Stock: 3465TAP475M035CCS Datasheet

DirectRFQ

TAP475K035CCS

KYOCERA AVXIn Stock: 758TAP475K035CCS Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TAP475M035FCS is determined by strict equivalence in the following parameters: capacitance value (4.7 µF), voltage rating (35 V), conformal coating type, ESR (3 Ohm), radial through-hole mounting, physical dimensions (0.217" diameter, 0.413" maximum height, 0.197" lead spacing), operating temperature range (-55°C to 125°C), and lifetime specification (1000 hours @ 85°C).

Tolerance variation is permitted as a substitution criterion. The TAP475M035FCS operates at ±20% tolerance. The substitute TAP475K035CCS offers improved tolerance at ±10%, representing an upgrade path for applications requiring tighter capacitance control. The substitute TAP475M035CCS maintains identical ±20% tolerance as the main part.

All identified substitutes are manufactured by KYOCERA AVX within the TAP series, maintain active product status, and comply with ROHS3 and REACH requirements.

Parameter Comparison

Engineering Selection Recommendations

Both TAP475M035CCS and TAP475K035CCS are direct electrical and mechanical equivalents to the TAP475M035FCS. Selection between these parts depends on tolerance requirements and application specifications.

TAP475M035CCS maintains identical electrical characteristics and tolerance specifications (±20%) as the main part, providing a direct replacement option. This part is suitable for applications where the original tolerance band is acceptable and inventory availability is a consideration factor.

TAP475K035CCS offers improved tolerance performance at ±10%, representing a higher-grade alternative within the same physical package and electrical rating. This upgrade path is applicable for designs requiring tighter capacitance control or where tolerance stack-up analysis demands reduced variation. All three parts maintain active production status, full ROHS3 compliance, and REACH unaffected certification, ensuring regulatory and supply chain continuity.

Frequently Asked Questions (FAQ)

Q: Can TAP475M035CCS be used as a direct replacement for TAP475M035FCS?

A: Yes. Both parts are electrically and mechanically identical, with matching 4.7 µF capacitance, 35 V rating, ±20% tolerance, 3 Ohm ESR, and identical physical dimensions. They are interchangeable in circuit applications.

Q: What is the difference between TAP475M035FCS and TAP475K035CCS?

A: The primary difference is tolerance specification. TAP475M035FCS operates at ±20% tolerance, while TAP475K035CCS operates at ±10% tolerance. All other electrical and mechanical parameters are identical. The tighter tolerance of TAP475K035CCS makes it suitable for applications requiring improved capacitance accuracy.

Q: Are all three parts physically identical?

A: Yes. All three parts share identical physical dimensions: 0.217" diameter, 0.413" maximum seated height, and 0.197" lead spacing. They are all radial through-hole components in the same package configuration.

Q: Do all substitute parts meet the same compliance requirements?

A: Yes. TAP475M035CCS and TAP475K035CCS both comply with ROHS3 standards and are REACH unaffected, matching the compliance profile of TAP475M035FCS.

Q: Which part should be selected for new designs?

A: For new designs, TAP475K035CCS is recommended when tolerance control is a design requirement. For applications where ±20% tolerance is acceptable, either TAP475M035FCS or TAP475M035CCS may be selected based on availability and supply chain considerations.