TAP336M016SCS Equivalent & Substitute Parts

Part Overview

The TAP336M016SCS is a 33 µF conformal coated tantalum capacitor rated at 16 V with radial through-hole mounting. Manufactured by KYOCERA AVX, this component is classified as Active and suitable for general-purpose applications requiring reliable energy storage in compact form factors. Substitute parts become necessary when design requirements demand tighter tolerance specifications, inventory constraints occur, or when equivalent performance can be achieved with alternative tolerance grades while maintaining identical electrical and mechanical characteristics.

Substiute Parts

TAP336M016SCS

KYOCERA AVXIn Stock: 1639TAP336M016SCS Datasheet

Current PartRFQ

TAP336K016SCS

KYOCERA AVXIn Stock: 1085TAP336K016SCS Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TAP336M016SCS is permissible with the TAP336K016SCS based on the following criteria:

Identical Parameters (No Compromise):

• Capacitance: 33 µF (exact match)
• Voltage Rating: 16 V (exact match)
• ESR: 1.6 Ohm (exact match)
• Type: Conformal Coated (exact match)
• Mounting Type: Through Hole Radial (exact match)
• Package / Case: Radial (exact match)
• Physical Dimensions: 0.236" Dia (6.00 mm), Height 0.394" (10.00 mm), Lead Spacing 0.098" (2.50 mm) (exact match)
• Operating Temperature Range: -55°C to 125°C (exact match)
• Lifetime @ Temperature: 1000 Hrs @ 85°C (exact match)
• RoHS Status: ROHS3 Compliant (exact match)

Differing Parameter (Upgrade):

• Tolerance: TAP336M016SCS has ±20% tolerance; TAP336K016SCS has ±10% tolerance

The TAP336K016SCS represents a tolerance upgrade, providing tighter capacitance accuracy while maintaining all other electrical and mechanical specifications. This substitution is valid for applications where improved tolerance performance is beneficial or required.

Parameter Comparison

Engineering Selection Recommendations

Both the TAP336M016SCS and TAP336K016SCS are Active products manufactured by KYOCERA AVX and maintain full ROHS3 compliance. Selection between these parts should be based on tolerance requirements:

• TAP336M016SCS (±20% tolerance): Suitable for general-purpose applications where standard tolerance specifications are acceptable and cost optimization is a consideration.

• TAP336K016SCS (±10% tolerance): Appropriate for applications requiring improved capacitance accuracy and tighter performance margins. The narrower tolerance band provides enhanced predictability in circuit behavior.

Both parts share identical physical footprints, electrical ratings, and thermal characteristics, ensuring direct substitution compatibility at the board level. Compliance certifications remain consistent across both options.

Frequently Asked Questions (FAQ)

Q: Can TAP336K016SCS replace TAP336M016SCS in existing designs?

A: Yes. The TAP336K016SCS is a direct substitute with identical electrical ratings, physical dimensions, and mounting characteristics. The only difference is the tighter ±10% tolerance compared to the ±20% tolerance of the original part.

Q: What is the primary advantage of the TAP336K016SCS over the TAP336M016SCS?

A: The TAP336K016SCS provides ±10% capacitance tolerance versus ±20% for the TAP336M016SCS. This tighter tolerance ensures more precise capacitance values, which may be critical in applications with strict performance requirements.

Q: Are the physical dimensions identical between both parts?

A: Yes. Both parts have identical radial package dimensions: 0.236" diameter (6.00 mm), maximum seated height of 0.394" (10.00 mm), and lead spacing of 0.098" (2.50 mm). They are mechanically interchangeable.

Q: Do both parts meet the same compliance standards?

A: Yes. Both TAP336M016SCS and TAP336K016SCS are ROHS3 compliant and maintain identical operating temperature ranges (-55°C to 125°C) and lifetime specifications (1000 Hrs @ 85°C).

Q: Is there a performance difference in ESR between the two parts?

A: No. Both parts have identical ESR specifications of 1.6 Ohm, ensuring equivalent performance in terms of impedance and heat dissipation characteristics.