TAP336M016CCS Equivalent & Substitute Parts

Part Overview

The TAP336M016CCS is a 33 µF conformal coated tantalum capacitor rated at 16 V with radial through-hole mounting. This component is designed for general-purpose applications requiring reliable energy storage in compact form factors. The part maintains active product status with full RoHS3 compliance and REACH unaffected designation. Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained within specified tolerance and voltage parameters.

Substiute Parts

TAP336M016CCS

KYOCERA AVXIn Stock: 1245TAP336M016CCS Datasheet

Current PartRFQ

TAP336K016CCS

KYOCERA AVXIn Stock: 2813TAP336K016CCS Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

The TAP336K016CCS qualifies as a direct substitute based on the following substitution criteria:

Matching Parameters:

• Capacitance: 33 µF (identical)
• Voltage Rating: 16 V (identical)
• Type: Conformal Coated Tantalum (identical)
• ESR: 1.6 Ohm (identical)
• Mounting Type: Through Hole Radial (identical)
• Package Dimensions: 0.236" Dia (6.00mm), Height 0.453" (11.50mm) (identical)
• Lead Spacing: 0.197" (5.00mm) (identical)
• Operating Temperature Range: -55°C ~ 125°C (identical)
• Lifetime Rating: 1000 Hrs @ 85°C (identical)

Tolerance Upgrade:

• Main Part Tolerance: ±20%
• Substitute Part Tolerance: ±10%

The substitute part offers improved tolerance specification while maintaining all other electrical and mechanical parameters. This represents a performance upgrade suitable for applications requiring tighter capacitance accuracy.

Parameter Comparison

Engineering Selection Recommendations

Both TAP336M016CCS and TAP336K016CCS maintain active product status with identical RoHS3 and REACH compliance certifications. Selection between these parts depends on application-specific tolerance requirements:

• TAP336M016CCS is suitable for general-purpose applications where ±20% capacitance tolerance is acceptable.
• TAP336K016CCS is appropriate for applications requiring tighter capacitance accuracy at ±10% tolerance.

Both parts are manufactured by KYOCERA AVX and share identical electrical performance characteristics, physical dimensions, and environmental ratings. The substitute part represents a direct drop-in replacement with improved tolerance specification.

Frequently Asked Questions (FAQ)

Q: Can TAP336K016CCS replace TAP336M016CCS in existing designs?

A: Yes. The TAP336K016CCS is a direct mechanical and electrical substitute. It maintains identical capacitance, voltage rating, ESR, package dimensions, and lead spacing. The only difference is improved tolerance specification (±10% versus ±20%).

Q: What is the primary difference between these two parts?

A: The tolerance specification differs. TAP336M016CCS has ±20% tolerance, while TAP336K016CCS has ±10% tolerance. All other parameters, including capacitance value, voltage rating, physical dimensions, and electrical characteristics, are identical.

Q: Are the physical dimensions identical?

A: Yes. Both parts have identical radial package dimensions: 0.236" diameter (6.00mm), maximum seated height of 0.453" (11.50mm), and lead spacing of 0.197" (5.00mm). They are mechanically interchangeable.

Q: Do both parts meet the same compliance standards?

A: Yes. Both TAP336M016CCS and TAP336K016CCS are ROHS3 compliant and REACH unaffected. They maintain identical environmental and regulatory compliance.

Q: Which part should I select for new designs?

A: Selection depends on your circuit's tolerance requirements. If your design can accommodate ±20% capacitance variation, either part is suitable. If tighter tolerance is required, TAP336K016CCS with ±10% tolerance is the appropriate choice.

Q: Are both parts currently available?

A: Yes. Both parts maintain active product status. TAP336M016CCS has 1208 pieces in stock, and TAP336K016CCS has 2775 pieces in stock.