TAP336M010GSB Equivalent & Substitute Parts

Part Overview

The TAP336M010GSB is a 33 µF conformal coated tantalum capacitor rated at 10 V with radial through-hole mounting. This component is designed for general-purpose applications requiring reliable energy storage in compact form factors. The part is currently active in production with full RoHS3 compliance and REACH unaffected status, ensuring suitability for modern electronic assemblies.

Substitute parts are identified when component availability is constrained or when design flexibility permits equivalent electrical and mechanical performance within the specified parameter tolerances.

Substiute Parts

TAP336M010GSB

KYOCERA AVXIn Stock: 1083TAP336M010GSB Datasheet

Current PartRFQ

TAP336M010CCS

KYOCERA AVXIn Stock: 2950TAP336M010CCS Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TAP336M010GSB is determined by strict equivalence across the following critical parameters:

• Capacitance value: 33 µF (exact match required)
• Rated voltage: 10 V (exact match required)
• Tolerance: ±20% (exact match required)
• Type: Conformal Coated (exact match required)
• ESR: 2.1 Ohm (exact match required)
• Operating temperature range: -55°C to 125°C (exact match required)
• Lifetime specification: 1000 Hrs @ 85°C (exact match required)
• Mounting type: Through Hole (exact match required)
• Package case: Radial (exact match required)
• Diameter: 0.236" (6.00mm) (exact match required)
• Height: 0.453" (11.50mm) (exact match required)
• RoHS compliance: ROHS3 Compliant (exact match required)

The TAP336M010CCS meets all substitution criteria and is classified as a manufacturer-recommended equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both TAP336M010GSB and TAP336M010CCS are active production components manufactured by KYOCERA AVX with identical electrical specifications and mechanical dimensions. Selection between these parts should be based on:

• Lead spacing accommodation: The TAP336M010GSB features 0.125" (3.18mm) lead spacing, while the TAP336M010CCS provides 0.197" (5.00mm) lead spacing. PCB layout and hole spacing requirements determine which variant is appropriate.
• Inventory availability: Current stock levels are 1037 units for TAP336M010GSB and 2855 units for TAP336M010CCS.
• Regulatory compliance: Both parts maintain ROHS3 compliance and REACH unaffected status, suitable for regulated applications.

Frequently Asked Questions (FAQ)

Q: Can TAP336M010CCS replace TAP336M010GSB in all applications?

A: Electrical substitution is valid when lead spacing does not constrain PCB layout. The primary difference is lead spacing: 0.125" (3.18mm) versus 0.197" (5.00mm). Verify PCB hole spacing before substitution.

Q: What determines if a tantalum capacitor is a valid substitute?

A: Valid substitutes must match capacitance (33 µF), rated voltage (10 V), tolerance (±20%), type (conformal coated), ESR (2.1 Ohm), operating temperature range (-55°C to 125°C), lifetime specification (1000 Hrs @ 85°C), mounting type (through hole), package case (radial), physical dimensions (0.236" diameter, 0.453" height), and compliance certifications (ROHS3, REACH unaffected).

Q: Are there any compliance differences between these parts?

A: No. Both parts are ROHS3 compliant and REACH unaffected, with identical ECCN (EAR99) and HTSUS (8532.21.0040) classifications.

Q: What is the significance of lead spacing in PCB design?

A: Lead spacing determines the distance between mounting holes on the PCB. TAP336M010GSB requires 0.125" (3.18mm) hole spacing, while TAP336M010CCS requires 0.197" (5.00mm) hole spacing. PCB layout must accommodate the selected lead spacing.

Q: Can these parts be used interchangeably in high-reliability applications?

A: Both parts meet identical electrical and thermal specifications with equivalent lifetime ratings (1000 Hrs @ 85°C). Substitution is valid when lead spacing is compatible with PCB design.