TAP336M006SCS Equivalent & Substitute Parts

Part Overview

The TAP336M006SCS is a 33 µF conformal coated tantalum capacitor rated at 6.3 V with radial through-hole mounting. Manufactured by KYOCERA AVX, this component is classified as Active product status and is suitable for general-purpose applications requiring reliable energy storage in compact form factors. Finding equivalent or substitute parts may be necessary due to inventory constraints, lead time requirements, or application-specific tolerance specifications.

Substiute Parts

TAP336M006SCS

KYOCERA AVXIn Stock: 819TAP336M006SCS Datasheet

Current PartRFQ

TAP336K006SCS

KYOCERA AVXIn Stock: 1511TAP336K006SCS Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TAP336M006SCS is determined by strict equivalence across the following critical parameters:

• Capacitance Value: Must remain 33 µF (no deviation permitted)
• Voltage Rating: Must remain 6.3 V or higher (no downrating)
• Mounting Type & Package: Must remain Through Hole Radial configuration
• Physical Dimensions: Must match or fit within PCB layout constraints (0.217" Dia, 0.354" Max Height, 0.098" Lead Spacing)
• Type: Must remain Conformal Coated tantalum capacitor
• ESR: Must remain 3 Ohm
• Operating Temperature Range: Must maintain -55°C ~ 125°C capability
• Compliance: Must maintain ROHS3 Compliant status

The TAP336K006SCS qualifies as a direct substitute based on identical performance across all critical parameters, with the exception of tolerance specification, which is tightened from ±20% to ±10%.

Parameter Comparison

Engineering Selection Recommendations

Both the TAP336M006SCS and TAP336K006SCS maintain Active product status and full ROHS3 compliance. The TAP336K006SCS offers improved tolerance specification (±10% versus ±20%), which provides tighter capacitance accuracy without compromising any electrical or mechanical characteristics. Selection between these parts should be based on application tolerance requirements and inventory availability. Both parts are suitable for direct substitution in circuits where the specified parameters are met.

Frequently Asked Questions (FAQ)

Q: Can TAP336K006SCS replace TAP336M006SCS in existing designs? A: Yes. The TAP336K006SCS is a direct substitute with identical electrical performance, physical dimensions, and mounting configuration. The tightened tolerance (±10% versus ±20%) represents an improvement in capacitance accuracy.

Q: Are there any physical compatibility concerns when substituting these parts? A: No. Both parts share identical package dimensions (0.217" Dia, 0.354" Max Height, 0.098" Lead Spacing), radial through-hole mounting, and manufacturer size code (E). PCB layout and footprints are fully compatible.

Q: Do both parts meet the same compliance standards? A: Yes. Both TAP336M006SCS and TAP336K006SCS are ROHS3 Compliant, REACH Unaffected, and classified under ECCN EAR99 with identical HTSUS coding (8532.21.0040).

Q: What is the primary difference between these two parts? A: The tolerance specification differs. TAP336M006SCS carries ±20% tolerance, while TAP336K006SCS carries ±10% tolerance. All other electrical and mechanical parameters remain identical.

Q: Are both parts suitable for the full operating temperature range? A: Yes. Both parts operate across -55°C ~ 125°C with 1000 hours lifetime rating at 85°C, ensuring equivalent thermal performance.