TAP335M035GSB Equivalent & Substitute Parts

Part Overview

The TAP335M035GSB is a 3.3 µF conformal coated tantalum capacitor rated for 35 V operation in a radial through-hole package. This component is manufactured by KYOCERA AVX and maintains active product status with full RoHS3 compliance. Substitute parts are identified when inventory constraints, lead time requirements, or design flexibility necessitate alternative sourcing while maintaining electrical and mechanical compatibility within the specified parameter tolerances.

Substiute Parts

TAP335M035GSB

KYOCERA AVXIn Stock: 1040TAP335M035GSB Datasheet

Current PartRFQ

TAP335M035CCS

KYOCERA AVXIn Stock: 2855TAP335M035CCS Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TAP335M035GSB is determined by strict equivalence across the following critical parameters:

• Electrical Equivalence: Capacitance value (3.3 µF), voltage rating (35 V), tolerance (±20%), and ESR (4 Ohm) must be identical
• Material Equivalence: Type must remain conformal coated tantalum
• Thermal Equivalence: Operating temperature range must match (-55°C to 125°C)
• Mechanical Equivalence: Mounting type (through hole radial), package diameter (5.00mm), height (10.00mm), and lead spacing must be compatible with existing PCB design
• Regulatory Equivalence: RoHS3 compliance status must be maintained

The TAP335M035CCS qualifies as a manufacturer-recommended substitute based on identical electrical and thermal specifications. The primary difference is lead spacing (0.197" vs. 0.125"), which requires verification against PCB hole pattern design before implementation.

Parameter Comparison

Engineering Selection Recommendations

Both TAP335M035GSB and TAP335M035CCS maintain active product status and full regulatory compliance (RoHS3 and REACH). Selection between these parts is determined by PCB hole pattern compatibility:

• TAP335M035GSB (0.125" lead spacing): Use when PCB design specifies 3.18mm hole pitch
• TAP335M035CCS (0.197" lead spacing): Use when PCB design specifies 5.00mm hole pitch

Both parts deliver identical electrical performance, thermal characteristics, and reliability metrics. The choice is purely mechanical and must align with existing PCB layout specifications. Inventory availability (TAP335M035CCS: 2805 pcs vs. TAP335M035GSB: 933 pcs) may influence sourcing decisions when lead time is a consideration.

Frequently Asked Questions (FAQ)

Q: Can TAP335M035CCS be used as a direct replacement for TAP335M035GSB?

A: Electrical and thermal compatibility is complete. However, the lead spacing differs (0.197" vs. 0.125"), requiring PCB hole pattern verification before substitution. If the PCB is designed for 3.18mm spacing, physical mounting will not be possible without PCB modification.

Q: Are there any performance differences between these two parts?

A: No. Both parts are identical in capacitance, voltage rating, tolerance, ESR, operating temperature range, and lifetime specifications. Differences are limited to lead spacing geometry.

Q: What does "conformal coated" mean for tantalum capacitors?

A: Conformal coating is a protective layer applied to the capacitor body that provides enhanced moisture resistance and environmental protection. Both parts feature this coating.

Q: Do both parts meet current regulatory requirements?

A: Yes. Both TAP335M035GSB and TAP335M035CCS are RoHS3 compliant and REACH unaffected, meeting current environmental and hazardous substance regulations.

Q: Which part should be selected for new designs?

A: Selection depends on PCB hole pattern design. Verify the required lead spacing (3.18mm or 5.00mm) in your PCB layout before specifying either part number.