TAP335M006SRW Equivalent & Substitute Parts

Part Overview

The TAP335M006SRW is a 3.3 µF conformal coated tantalum capacitor manufactured by KYOCERA AVX, rated for 6.3 V operation in a radial through-hole package. This component is classified as Active product status with full RoHS3 compliance. Substitute parts are identified when equivalent capacitance and voltage ratings are maintained while offering improved electrical characteristics or enhanced availability.

Substiute Parts

TAP335M006SRW

KYOCERA AVXIn Stock: 780TAP335M006SRW Datasheet

Current PartRFQ

TAP335K016SCS

KYOCERA AVXIn Stock: 2653TAP335K016SCS Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the TAP335M006SRW is determined by the following criteria:

• Capacitance value must remain 3.3 µF
• Voltage rating must be equal to or greater than 6.3 V
• Mounting type must be Through Hole Radial
• Physical dimensions must match (0.177" Dia, 0.276" Max Height, 0.098" Lead Spacing)
• Conformal coating type must be maintained
• Operating temperature range must encompass -55°C ~ 125°C
• RoHS3 compliance must be maintained

The TAP335K016SCS qualifies as a substitute by meeting all mechanical and electrical compatibility requirements while providing enhanced performance characteristics.

Parameter Comparison

Engineering Selection Recommendations

Both TAP335M006SRW and TAP335K016SCS are Active status components with full RoHS3 compliance and REACH unaffected status. The TAP335K016SCS provides improved tolerance (±10% versus ±20%) and reduced ESR (6 Ohm versus 13 Ohm) while maintaining identical physical form factor and operating temperature specifications. The higher voltage rating (16 V versus 6.3 V) ensures compatibility in applications where the original 6.3 V specification is met. Selection between these parts depends on application voltage headroom requirements and tolerance specifications.

Frequently Asked Questions (FAQ)

Q: Can TAP335K016SCS replace TAP335M006SRW in all applications?

A: Yes, provided the circuit operates at or below 6.3 V. The TAP335K016SCS is rated for 16 V, making it suitable for any application designed for the 6.3 V rated part.

Q: What is the significance of the tolerance difference?

A: TAP335M006SRW has ±20% tolerance while TAP335K016SCS has ±10% tolerance. Applications requiring tighter capacitance accuracy benefit from the substitute part.

Q: Does the ESR difference affect circuit performance?

A: The TAP335K016SCS has lower ESR (6 Ohm versus 13 Ohm). Lower ESR reduces heat generation and improves high-frequency performance. This is beneficial in most applications.

Q: Are the physical dimensions identical?

A: Yes. Both parts share identical radial package dimensions: 0.177" diameter, 0.276" maximum seated height, and 0.098" lead spacing, ensuring direct PCB compatibility.

Q: What packaging formats are available?

A: TAP335M006SRW is supplied in Tape & Reel format. TAP335K016SCS is supplied in Bulk packaging. Confirm packaging requirements for your procurement process.