TAP335M006SCS Equivalent & Substitute Parts

Part Overview

The TAP335M006SCS is a 3.3 µF conformal coated tantalum capacitor rated at 6.3 V with ±20% tolerance, manufactured by KYOCERA AVX in the TAP series. This through-hole radial component is designed for general-purpose applications requiring reliable energy storage in compact form factors. The part is currently active in production with 748 units in stock.

Substitute parts are identified when design requirements allow for improved electrical performance, higher voltage ratings, or tighter tolerance specifications while maintaining mechanical and thermal compatibility.

Substiute Parts

TAP335M006SCS

KYOCERA AVXIn Stock: 788TAP335M006SCS Datasheet

Current PartRFQ

TAP335K010SCS

KYOCERA AVXIn Stock: 3081TAP335K010SCS Datasheet

UpgradeRFQ

TAP335K016SCS

KYOCERA AVXIn Stock: 2653TAP335K016SCS Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TAP335M006SCS is determined by the following criteria:

Mandatory Compatibility Parameters:

• Capacitance value: 3.3 µF (exact match required)
• Package type: Radial, through-hole configuration
• Physical dimensions: 0.177" diameter, 0.276" maximum height, 0.098" lead spacing
• Mounting type: Through hole
• Series: TAP (KYOCERA AVX)
• Operating temperature range: -55°C to 125°C minimum
• Conformal coating type

Allowable Variation Parameters:

• Voltage rating: May be equal to or higher than 6.3 V
• Tolerance: May be tighter (lower percentage) than ±20%
• ESR: May be lower than 13 Ohm
• Lifetime rating: May be equal to or exceed 1000 Hrs @ 85°C

The identified substitutes TAP335K010SCS and TAP335K016SCS meet all mandatory compatibility requirements while offering improved electrical characteristics through higher voltage ratings and tighter tolerance specifications.

Parameter Comparison

Engineering Selection Recommendations

TAP335K010SCS Selection Criteria: This substitute provides a 10 V voltage rating with ±10% tolerance and 10 Ohm ESR. Selection is appropriate for applications where the original 6.3 V rating provides insufficient design margin and tighter capacitance tolerance is beneficial. All mechanical and thermal specifications remain identical to the primary part.

TAP335K016SCS Selection Criteria: This substitute provides a 16 V voltage rating with ±10% tolerance and 6 Ohm ESR. Selection is appropriate for applications requiring maximum voltage headroom and lowest ESR performance. The reduced ESR characteristic improves transient response and reduces heat dissipation. All mechanical and thermal specifications remain identical to the primary part.

Compliance Considerations: All three parts maintain ROHS3 compliance, REACH unaffected status, and identical operating temperature ranges. Selection between parts is based solely on circuit voltage requirements and tolerance specifications, with no compliance trade-offs.

Frequently Asked Questions (FAQ)

Q: Can TAP335K010SCS or TAP335K016SCS be used as direct drop-in replacements for TAP335M006SCS?

A: Yes, both substitute parts are direct mechanical and electrical drop-in replacements. Identical package dimensions, lead spacing, and mounting type ensure PCB compatibility without layout modifications.

Q: What is the primary difference between the three parts?

A: The three parts differ in voltage rating (6.3 V, 10 V, and 16 V respectively) and tolerance specification (±20% versus ±10%). Capacitance value and physical form factor are identical across all three.

Q: When should TAP335K016SCS be selected over TAP335K010SCS?

A: TAP335K016SCS should be selected when circuit design requires the highest voltage rating (16 V) or when the lowest ESR value (6 Ohm) is necessary for transient response or thermal performance requirements.

Q: Are there any thermal or reliability differences between these parts?

A: All three parts share identical operating temperature ranges (-55°C to 125°C) and lifetime ratings (1000 Hrs @ 85°C). No thermal or reliability trade-offs exist between the substitutes.

Q: Do all parts maintain the same conformal coating specification?

A: Yes, all three parts are conformal coated tantalum capacitors with identical coating type and environmental protection characteristics.

Q: What inventory levels are available for each part?

A: TAP335M006SCS: 748 units; TAP335K010SCS: 3057 units; TAP335K016SCS: 2640 units.