TAP334K035GSB Equivalent & Substitute Parts

Part Overview

The TAP334K035GSB is a 0.33 µF conformal coated tantalum capacitor rated for 35 V operation in radial through-hole configuration. This component is manufactured by KYOCERA AVX and maintains Active product status. Substitute parts are identified when inventory constraints, lead time requirements, or design flexibility necessitate alternative sourcing while maintaining electrical and mechanical compatibility within the specified parameter envelope.

Substiute Parts

TAP334K035GSB

KYOCERA AVXIn Stock: 1168TAP334K035GSB Datasheet

Current PartRFQ

TAP334K035CCS

KYOCERA AVXIn Stock: 5024TAP334K035CCS Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TAP334K035GSB is determined by strict equivalence across the following critical parameters:

• Capacitance: 0.33 µF (exact match required)
• Tolerance: ±10% (exact match required)
• Voltage Rating: 35 V (exact match required)
• Type: Conformal Coated (exact match required)
• ESR: 15 Ohm (exact match required)
• Operating Temperature Range: -55°C ~ 125°C (exact match required)
• Lifetime @ Temperature: 1000 Hrs @ 85°C (exact match required)
• Mounting Type: Through Hole (exact match required)
• Package / Case: Radial (exact match required)
• Manufacturer Size Code: A (exact match required)
• RoHS Status: ROHS3 Compliant (exact match required)

The TAP334K035CCS qualifies as a direct substitute based on full alignment with all critical electrical and mechanical parameters. Lead spacing variation (0.197" vs. 0.125") does not preclude substitution when PCB layout accommodates the increased spacing.

Parameter Comparison

Engineering Selection Recommendations

Both TAP334K035GSB and TAP334K035CCS maintain Active product status and full ROHS3 compliance. Selection between these parts is determined by PCB layout constraints and lead spacing requirements. The TAP334K035GSB features 0.125" (3.18mm) lead spacing, while the TAP334K035CCS provides 0.197" (5.00mm) lead spacing. All other electrical characteristics, thermal performance, and reliability metrics are identical. Component selection should be based on PCB footprint compatibility and available inventory.

Frequently Asked Questions (FAQ)

Q: Can TAP334K035CCS replace TAP334K035GSB in existing designs?

A: Yes, provided PCB layout accommodates the increased lead spacing of 0.197" (5.00mm) versus the original 0.125" (3.18mm). All electrical and thermal parameters are identical.

Q: Are there differences in reliability or lifetime between these parts?

A: No. Both parts specify identical lifetime ratings of 1000 Hrs @ 85°C and operate across the same temperature range of -55°C ~ 125°C.

Q: What is the significance of lead spacing variation?

A: Lead spacing affects PCB footprint design and component placement. The TAP334K035CCS requires wider pad spacing on the circuit board. Physical dimensions (diameter and height) remain identical.

Q: Do both parts meet the same compliance standards?

A: Yes. Both TAP334K035GSB and TAP334K035CCS are ROHS3 compliant and carry identical REACH and ECCN classifications.

Q: Is conformal coating applied to both substitute options?

A: Yes. Both parts are specified as conformal coated tantalum capacitors, providing identical environmental protection characteristics.