TAP227M010HSB Equivalent & Substitute Parts

Part Overview

The TAP227M010HSB is a 220 µF conformal coated tantalum capacitor rated at 10 V with radial through-hole mounting. Manufactured by KYOCERA AVX, this component is classified as Active product status and is designed for general purpose applications requiring reliable energy storage in compact form factors. Substitute parts become necessary when addressing lead spacing constraints, inventory availability, or specific board layout requirements while maintaining identical electrical performance and compliance certifications.

Substiute Parts

TAP227M010HSB

KYOCERA AVXIn Stock: 1133TAP227M010HSB Datasheet

Current PartRFQ

TAP227M010CCS

KYOCERA AVXIn Stock: 1127TAP227M010CCS Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The TAP227M010CCS qualifies as a direct substitute for the TAP227M010HSB based on the following critical parameters:

• Identical capacitance value: 220 µF
• Identical tolerance: ±20%
• Identical rated voltage: 10 V
• Identical type: Conformal Coated
• Identical ESR: 600 mOhm
• Identical operating temperature range: -55°C to 125°C
• Identical lifetime specification: 1000 Hrs @ 85°C
• Identical mounting type: Through Hole
• Identical package: Radial
• Identical physical diameter: 0.394" (10.00 mm)
• Identical height: 0.669" (17.00 mm)
• Identical compliance certifications: ROHS3 Compliant, REACH Unaffected

The primary distinction between these parts is the lead spacing specification, which differs to accommodate varying PCB layout requirements.

Parameter Comparison

Engineering Selection Recommendations

Both TAP227M010HSB and TAP227M010CCS are Active status components manufactured by KYOCERA AVX and carry identical ROHS3 and REACH compliance certifications. Selection between these parts is determined solely by PCB layout requirements and lead spacing constraints. The TAP227M010HSB features 0.250" (6.35 mm) lead spacing, while the TAP227M010CCS provides 0.197" (5.00 mm) lead spacing for applications requiring tighter component pitch. All electrical characteristics, thermal performance, and reliability specifications remain constant across both variants. Both parts are suitable for direct substitution in applications where the specified lead spacing accommodates the PCB design.

Frequently Asked Questions (FAQ)

Q: Can TAP227M010CCS replace TAP227M010HSB in my circuit?

A: Yes. Both parts are electrically and thermally identical with matching capacitance, voltage rating, ESR, and operating temperature specifications. The only difference is lead spacing. Substitution is valid if your PCB layout accommodates the 0.197" (5.00 mm) lead spacing of the TAP227M010CCS.

Q: What is the primary difference between these two part numbers?

A: The lead spacing differs. TAP227M010HSB has 0.250" (6.35 mm) spacing between leads, while TAP227M010CCS has 0.197" (5.00 mm) spacing. All other mechanical and electrical parameters are identical.

Q: Are both parts ROHS3 compliant?

A: Yes. Both TAP227M010HSB and TAP227M010CCS are ROHS3 Compliant and REACH Unaffected, meeting current environmental and regulatory requirements.

Q: Do these parts have the same reliability specifications?

A: Yes. Both parts share identical lifetime specifications of 1000 Hrs @ 85°C and operate across the same temperature range of -55°C to 125°C.

Q: Which part should I select for a new design?

A: Selection depends on your PCB layout requirements. If your design accommodates 0.197" (5.00 mm) lead spacing, either part is suitable. Verify your PCB footprint spacing before finalizing component selection.