TAP227K006HSB Equivalent & Substitute Parts

Part Overview

The TAP227K006HSB is a 220 µF conformal coated tantalum capacitor rated at 6.3 V with radial through-hole mounting. Manufactured by KYOCERA AVX, this component is classified as Active product status and is designed for general purpose applications requiring reliable energy storage in compact form factors. Substitute parts become necessary when addressing lead spacing constraints, inventory availability, or specific application layout requirements while maintaining identical electrical performance.

Substiute Parts

TAP227K006HSB

KYOCERA AVXIn Stock: 935TAP227K006HSB Datasheet

Current PartRFQ

TAP227K006CCS

KYOCERA AVXIn Stock: 1079TAP227K006CCS Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TAP227K006HSB is determined by strict equivalence across the following critical parameters:

• Capacitance: 220 µF (exact match required)
• Tolerance: ±10% (exact match required)
• Voltage Rating: 6.3 V (exact match required)
• Type: Conformal Coated (exact match required)
• ESR: 900 mOhm (exact match required)
• Operating Temperature Range: -55°C ~ 125°C (exact match required)
• Lifetime @ Temp.: 1000 Hrs @ 85°C (exact match required)
• Mounting Type: Through Hole Radial (exact match required)
• Physical Diameter: 0.354" Dia (9.00 mm) (exact match required)
• Height - Seated (Max): 0.571" (14.50 mm) (exact match required)
• RoHS Status: ROHS3 Compliant (exact match required)

The TAP227K006CCS qualifies as a direct substitute based on full alignment with all critical electrical and mechanical parameters. The only variance is lead spacing, which changes from 0.250" (6.35 mm) to 0.197" (5.00 mm), accommodating different PCB layout requirements without affecting electrical performance.

Parameter Comparison

Engineering Selection Recommendations

Both TAP227K006HSB and TAP227K006CCS maintain Active product status from KYOCERA AVX and are ROHS3 Compliant. Selection between these parts is determined by PCB layout requirements:

• TAP227K006HSB: Use when PCB design specifies 0.250" (6.35 mm) lead spacing
• TAP227K006CCS: Use when PCB design specifies 0.197" (5.00 mm) lead spacing

Both parts deliver identical electrical performance, thermal characteristics, and regulatory compliance. The substitution is valid for any application where the lead spacing accommodates the target PCB footprint.

Frequently Asked Questions (FAQ)

Q: Can TAP227K006CCS replace TAP227K006HSB in existing designs?

A: Yes, provided the PCB footprint accommodates the 0.197" (5.00 mm) lead spacing of the TAP227K006CCS. All electrical parameters, thermal performance, and compliance certifications are identical.

Q: What is the primary difference between these two parts?

A: Lead spacing differs: TAP227K006HSB uses 0.250" (6.35 mm) spacing, while TAP227K006CCS uses 0.197" (5.00 mm) spacing. This accommodates different PCB layout densities without affecting capacitor performance.

Q: Are both parts ROHS3 compliant?

A: Yes, both TAP227K006HSB and TAP227K006CCS are ROHS3 Compliant.

Q: Do these parts have the same operating temperature range?

A: Yes, both operate across -55°C ~ 125°C with identical lifetime specifications of 1000 Hrs @ 85°C.

Q: Which part should I select for a new design?

A: Selection depends on your PCB layout requirements. Verify the required lead spacing in your design specifications and select the corresponding part number.