TAP226M050HSB Equivalent & Substitute Parts

Part Overview

The TAP226M050HSB is a 22 µF conformal coated tantalum capacitor rated for 50 V operation in a radial through-hole package. This component is manufactured by KYOCERA AVX and maintains Active product status. Equivalent and substitute parts are identified when identical electrical specifications and mechanical compatibility are maintained across the component family, ensuring direct interchangeability in circuit applications without design modification.

Substiute Parts

TAP226M050HSB

KYOCERA AVXIn Stock: 724TAP226M050HSB Datasheet

Current PartRFQ

TAP226M050CCS

KYOCERA AVXIn Stock: 2599TAP226M050CCS Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TAP226M050HSB is determined by strict equivalence across the following critical parameters:

• Capacitance value: 22 µF
• Tolerance: ±20%
• Rated voltage: 50 V
• Dielectric type: Conformal coated tantalum
• ESR: 1 Ohm
• Operating temperature range: -55°C ~ 125°C
• Lifetime specification: 1000 Hrs @ 85°C
• Mounting configuration: Through hole radial
• Body diameter: 0.354" (9.00mm)
• Height: 0.551" (14.00mm)
• Regulatory compliance: ROHS3 Compliant

The identified substitute maintains all electrical and thermal specifications. Mechanical compatibility is confirmed through identical body dimensions and radial lead configuration. Both components are manufactured by KYOCERA AVX within the TAP series and carry Active product status.

Parameter Comparison

Engineering Selection Recommendations

Both TAP226M050HSB and TAP226M050CCS are Active products manufactured by KYOCERA AVX and maintain ROHS3 compliance. The components are electrically and thermally equivalent across all specified parameters. The primary distinction is lead spacing: TAP226M050HSB features 0.250" (6.35mm) spacing, while TAP226M050CCS features 0.197" (5.00mm) spacing. Selection between these parts must be based on printed circuit board layout requirements and lead hole spacing design. Both components satisfy identical electrical performance criteria and regulatory requirements.

Frequently Asked Questions (FAQ)

Q: Can TAP226M050CCS be used as a direct replacement for TAP226M050HSB?

A: Electrical and thermal specifications are identical. Lead spacing differs (0.250" versus 0.197"), requiring verification of PCB hole pattern compatibility before substitution.

Q: Are both parts ROHS3 compliant?

A: Yes. Both TAP226M050HSB and TAP226M050CCS carry ROHS3 Compliant status.

Q: What is the significance of lead spacing in substitution?

A: Lead spacing determines physical fit on the printed circuit board. Mismatched spacing may prevent proper component insertion or create mechanical stress on leads and solder joints.

Q: Do both parts operate across the same temperature range?

A: Yes. Both components operate from -55°C to 125°C with identical lifetime specifications of 1000 hours at 85°C.

Q: Are there inventory differences between these parts?

A: TAP226M050HSB has 677 pieces in stock. TAP226M050CCS has 2497 pieces in stock. Availability should be confirmed with the supplier.