TAP226K050GSB Equivalent & Substitute Parts

Part Overview

The TAP226K050GSB is a 22 µF conformal coated tantalum capacitor rated for 50 V operation in a radial through-hole package. This component is manufactured by KYOCERA AVX and maintains Active product status. Equivalent and substitute parts are identified when component availability is limited, supply chain disruptions occur, or inventory requirements necessitate alternative sourcing from the same manufacturer's product line while maintaining identical electrical and mechanical specifications.

Substiute Parts

TAP226K050GSB

KYOCERA AVXIn Stock: 873TAP226K050GSB Datasheet

Current PartRFQ

TAP226K050CCS

KYOCERA AVXIn Stock: 2161TAP226K050CCS Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TAP226K050GSB is determined by strict equivalence across the following critical parameters:

• Capacitance value: 22 µF
• Tolerance: ±10%
• Voltage rating: 50 V
• Type: Conformal Coated
• ESR: 1 Ohm
• Operating temperature range: -55°C to 125°C
• Lifetime specification: 1000 Hrs @ 85°C
• Mounting type: Through Hole
• Package type: Radial
• Body diameter: 0.354" (9.00 mm)
• Maximum seated height: 0.551" (14.00 mm)
• RoHS compliance: ROHS3 Compliant

The substitute part TAP226K050CCS meets all electrical and thermal specifications. The only permitted variation is lead spacing, which differs from 0.125" (3.18 mm) to 0.197" (5.00 mm). This variation is acceptable for through-hole radial packages where lead spacing accommodates standard PCB hole patterns.

Parameter Comparison

Engineering Selection Recommendations

Both TAP226K050GSB and TAP226K050CCS are Active products manufactured by KYOCERA AVX with full ROHS3 compliance. Selection between these parts is based on PCB layout requirements and lead spacing accommodation.

The TAP226K050GSB features 0.125" (3.18 mm) lead spacing and is suitable for compact PCB designs with tighter hole pattern spacing. The TAP226K050CCS features 0.197" (5.00 mm) lead spacing and accommodates standard through-hole PCB patterns with wider lead spacing.

Both parts deliver identical electrical performance, thermal characteristics, and reliability specifications. Component selection should be determined by PCB design requirements and available hole pattern spacing on the target circuit board.

Frequently Asked Questions (FAQ)

Q: Can TAP226K050CCS replace TAP226K050GSB in all applications?

A: TAP226K050CCS is electrically and thermally equivalent to TAP226K050GSB. The primary consideration is lead spacing. TAP226K050CCS has 0.197" (5.00 mm) lead spacing compared to 0.125" (3.18 mm) on the original part. Substitution is valid only if the PCB design accommodates the wider lead spacing.

Q: Are there differences in reliability or lifetime between these parts?

A: No. Both parts specify identical lifetime ratings of 1000 Hrs @ 85°C and operate across the same temperature range of -55°C to 125°C.

Q: What is the significance of lead spacing variation?

A: Lead spacing determines the distance between component leads on the PCB. The TAP226K050CCS with 0.197" spacing is compatible with standard through-hole PCB patterns. The TAP226K050GSB with 0.125" spacing is designed for compact layouts. PCB hole patterns must accommodate the specific lead spacing of the selected part.

Q: Are both parts RoHS compliant?

A: Yes. Both TAP226K050GSB and TAP226K050CCS are ROHS3 Compliant.

Q: Do these parts have identical electrical specifications?

A: Yes. Both parts are rated at 22 µF capacitance with ±10% tolerance, 50 V voltage rating, 1 Ohm ESR, and conformal coating. Electrical performance is identical.