TAP226K025HSB Equivalent & Substitute Parts

Part Overview

The TAP226K025HSB is a 22 µF conformal coated tantalum capacitor rated at 25 V with radial through-hole mounting. This component is manufactured by KYOCERA AVX and is currently in active production status. The part is designed for general-purpose applications requiring reliable energy storage in compact form factors. Substitute parts are identified when inventory constraints, lead time requirements, or design flexibility necessitate alternative sourcing while maintaining electrical and mechanical compatibility.

Substiute Parts

TAP226K025HSB

KYOCERA AVXIn Stock: 970TAP226K025HSB Datasheet

Current PartRFQ

TAP226K025CCS

KYOCERA AVXIn Stock: 1004TAP226K025CCS Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TAP226K025HSB is determined by strict equivalence across the following critical parameters:

• Capacitance: 22 µF (exact match required)
• Tolerance: ±10% (exact match required)
• Voltage Rating: 25 V (exact match required)
• Type: Conformal Coated (exact match required)
• ESR: 1.5 Ohm (exact match required)
• Operating Temperature Range: -55°C to 125°C (exact match required)
• Lifetime @ Temperature: 1000 Hrs @ 85°C (exact match required)
• Mounting Type: Through Hole (exact match required)
• Package / Case: Radial (exact match required)
• Size / Dimension: 0.276" Dia (7.00 mm) (exact match required)
• Height - Seated (Max): 0.472" (12.00 mm) (exact match required)
• RoHS Status: ROHS3 Compliant (exact match required)

The TAP226K025CCS meets all substitution criteria and is classified as a manufacturer-recommended equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both TAP226K025HSB and TAP226K025CCS are active production components manufactured by KYOCERA AVX with identical electrical specifications and thermal performance characteristics. Both parts maintain ROHS3 compliance and REACH unaffected status, meeting current regulatory requirements for industrial and commercial applications.

The primary distinction between these parts is lead spacing: TAP226K025HSB features 0.250" (6.35 mm) lead spacing, while TAP226K025CCS features 0.197" (5.00 mm) lead spacing. This difference affects PCB layout and hole positioning. Selection between these parts must be based on the specific lead spacing requirement of the target circuit board design. Both parts are electrically and thermally equivalent and support identical application requirements.

Frequently Asked Questions (FAQ)

Q: Can TAP226K025CCS be used as a direct replacement for TAP226K025HSB?

A: TAP226K025CCS is electrically and thermally equivalent to TAP226K025HSB. However, the lead spacing differs (0.197" versus 0.250"). Direct PCB substitution is only possible if the circuit board layout accommodates the 0.197" lead spacing of the TAP226K025CCS. If the PCB is designed for 0.250" lead spacing, physical modification or board redesign is required.

Q: Are there any compliance or regulatory differences between these parts?

A: Both parts carry identical RoHS3 compliance and REACH unaffected status. No regulatory or compliance differences exist between TAP226K025HSB and TAP226K025CCS.

Q: What is the significance of lead spacing in capacitor selection?

A: Lead spacing determines the physical distance between component leads on the PCB. This measurement must match the hole pattern on the circuit board. Mismatched lead spacing prevents proper component installation and creates assembly defects.

Q: Are both parts currently available?

A: Both TAP226K025HSB and TAP226K025CCS are in active production status with current inventory availability. Specific stock levels should be confirmed through the component supplier.

Q: Do these parts have identical electrical performance in circuit applications?

A: Yes. Both parts share identical capacitance (22 µF), voltage rating (25 V), tolerance (±10%), ESR (1.5 Ohm), operating temperature range (-55°C to 125°C), and lifetime specifications (1000 Hrs @ 85°C). Electrical performance in circuit applications is equivalent.