TAP226K016GSB Equivalent & Substitute Parts

Part Overview

The TAP226K016GSB is a 22 µF conformal coated tantalum capacitor rated at 16 V with radial through-hole mounting. Manufactured by KYOCERA AVX, this component is classified as Active product status and is RoHS3 compliant. Alternative part numbers within the same series may be required due to lead spacing variations, inventory availability, or specific PCB layout requirements while maintaining identical electrical performance.

Substiute Parts

TAP226K016GSB

KYOCERA AVXIn Stock: 1040TAP226K016GSB Datasheet

Current PartRFQ

TAP226K016CCS

KYOCERA AVXIn Stock: 2450TAP226K016CCS Datasheet

MFR RecommendedRFQ

TAP226K016HSB

KYOCERA AVXIn Stock: 1862TAP226K016HSB Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TAP226K016GSB are qualified based on matching the following critical electrical and mechanical parameters:

• Capacitance: 22 µF
• Tolerance: ±10%
• Voltage Rating: 16 V
• Type: Conformal Coated
• ESR: 2 Ohm
• Operating Temperature: -55°C ~ 125°C
• Lifetime @ Temp.: 1000 Hrs @ 85°C
• Mounting Type: Through Hole
• Package / Case: Radial
• Size / Dimension: 0.236" Dia (6.00mm)
• Height - Seated (Max): 0.453" (11.50mm)
• RoHS Status: RoHS3 Compliant

The substitute parts TAP226K016CCS and TAP226K016HSB differ only in lead spacing, which is a mechanical parameter that affects PCB layout compatibility without altering electrical performance.

Parameter Comparison

Engineering Selection Recommendations

All three parts—TAP226K016GSB, TAP226K016CCS, and TAP226K016HSB—are Active product status from KYOCERA AVX and maintain RoHS3 compliance. Selection between these parts is determined solely by PCB layout requirements, specifically the required lead spacing distance. The TAP226K016GSB accommodates 0.125" (3.18mm) lead spacing, TAP226K016CCS accommodates 0.197" (5.00mm) lead spacing, and TAP226K016HSB accommodates 0.250" (6.35mm) lead spacing. All other electrical and mechanical characteristics remain identical across the three variants.

Frequently Asked Questions (FAQ)

Q: Can TAP226K016CCS be used as a direct replacement for TAP226K016GSB?

A: TAP226K016CCS is electrically and mechanically equivalent to TAP226K016GSB with one exception: lead spacing differs (0.197" versus 0.125"). Direct substitution is possible only if the PCB layout accommodates the wider lead spacing of TAP226K016CCS.

Q: What is the primary difference between these three part numbers?

A: The three parts differ only in lead spacing: TAP226K016GSB (0.125"), TAP226K016CCS (0.197"), and TAP226K016HSB (0.250"). All electrical parameters, including capacitance, voltage rating, ESR, and operating temperature range, are identical.

Q: Are all three parts RoHS3 compliant?

A: Yes, TAP226K016GSB, TAP226K016CCS, and TAP226K016HSB are all RoHS3 compliant.

Q: Does lead spacing affect electrical performance?

A: No. Lead spacing is a mechanical parameter that affects PCB layout compatibility only. Electrical performance remains unchanged across all three variants.

Q: Which part should I select for a new design?

A: Select the part number that matches your PCB hole spacing requirement. If your PCB is designed for 0.125" spacing, use TAP226K016GSB. For 0.197" spacing, use TAP226K016CCS. For 0.250" spacing, use TAP226K016HSB.