TAP225M016HSB Equivalent & Substitute Parts

Part Overview

The TAP225M016HSB is a 2.2 µF conformal coated tantalum capacitor rated for 16 V operation in a radial through-hole package. This component is manufactured by KYOCERA AVX and maintains Active product status. Equivalent and substitute parts are identified when identical electrical specifications and mechanical compatibility requirements are met, enabling direct replacement in circuit designs without performance degradation.

Substiute Parts

TAP225M016HSB

KYOCERA AVXIn Stock: 804TAP225M016HSB Datasheet

Current PartRFQ

TAP225M016CCS

KYOCERA AVXIn Stock: 1395TAP225M016CCS Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TAP225M016HSB is determined by strict equivalence across the following critical parameters:

• Electrical Equivalence: Capacitance value (2.2 µF), tolerance (±20%), rated voltage (16 V), and ESR (8 Ohm) must remain identical
• Environmental Specifications: Operating temperature range (-55°C to 125°C) and lifetime rating (1000 Hrs @ 85°C) must be maintained
• Mechanical Compatibility: Mounting type (Through Hole), package type (Radial), and physical dimensions must support direct board-level replacement
• Regulatory Compliance: RoHS3 compliance status must be preserved

The identified substitute part TAP225M016CCS meets all these criteria and is manufactured by the same supplier (KYOCERA AVX) within the same TAP series.

Parameter Comparison

Engineering Selection Recommendations

Both TAP225M016HSB and TAP225M016CCS are Active status components manufactured by KYOCERA AVX and maintain full ROHS3 compliance. The primary distinction between these parts is lead spacing: TAP225M016HSB features 0.250" (6.35 mm) lead spacing, while TAP225M016CCS features 0.197" (5.00 mm) lead spacing. Selection between these parts must be based on PCB design requirements and lead hole spacing specifications. All other electrical and mechanical parameters are identical, ensuring functional equivalence in applications where lead spacing compatibility is confirmed.

Frequently Asked Questions (FAQ)

Q: Can TAP225M016CCS directly replace TAP225M016HSB on existing PCBs?

A: Direct replacement depends on PCB lead hole spacing. TAP225M016HSB has 0.250" (6.35 mm) lead spacing, while TAP225M016CCS has 0.197" (5.00 mm) lead spacing. PCB design must accommodate the specific lead spacing of the selected part.

Q: Are the electrical specifications identical between these parts?

A: Yes. Both parts share identical capacitance (2.2 µF), tolerance (±20%), voltage rating (16 V), ESR (8 Ohm), operating temperature range (-55°C to 125°C), and lifetime rating (1000 Hrs @ 85°C).

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both TAP225M016HSB and TAP225M016CCS are ROHS3 compliant and maintain Active product status from KYOCERA AVX.

Q: What is the primary difference between these substitute parts?

A: The primary difference is lead spacing. TAP225M016HSB uses 0.250" (6.35 mm) spacing, while TAP225M016CCS uses 0.197" (5.00 mm) spacing. Physical dimensions and all electrical parameters remain identical.

Q: Are conformal coated tantalum capacitors suitable for high-reliability applications?

A: Conformal coating provides environmental protection. Both parts are rated for -55°C to 125°C operation with 1000 Hrs lifetime at 85°C, supporting applications within these specified parameters.