TAP225K050GSB Equivalent & Substitute Parts

Part Overview

The TAP225K050GSB is a 2.2 µF conformal coated tantalum capacitor rated for 50 V operation in a radial through-hole package. This component is manufactured by KYOCERA AVX and maintains active product status with full RoHS3 compliance. Equivalent and substitute parts are identified when identical electrical specifications and mechanical compatibility are maintained across the allowed parameter range for this capacitor category.

Substiute Parts

TAP225K050GSB

KYOCERA AVXIn Stock: 1841TAP225K050GSB Datasheet

Current PartRFQ

TAP225K050HSB

KYOCERA AVXIn Stock: 1933TAP225K050HSB Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the TAP225K050GSB is determined by strict equivalence across the following critical parameters:

• Capacitance value: 2.2 µF
• Tolerance: ±10%
• Rated voltage: 50 V
• Conformal coating type
• ESR specification: 4.6 Ohm
• Operating temperature range: -55°C ~ 125°C
• Through-hole radial mounting configuration
• Package diameter: 0.217" (5.50mm)
• RoHS3 compliance status

The TAP225K050HSB qualifies as a direct substitute based on identical electrical performance and mechanical compatibility within these parameters. The primary distinction between these parts is the lead spacing specification.

Parameter Comparison

Engineering Selection Recommendations

Both TAP225K050GSB and TAP225K050HSB maintain active product status with identical electrical specifications and full RoHS3 compliance. Selection between these parts is determined by printed circuit board layout requirements, specifically the lead spacing accommodation. The TAP225K050GSB features 0.125" (3.18mm) lead spacing, while the TAP225K050HSB provides 0.250" (6.35mm) lead spacing. All other mechanical and electrical parameters remain equivalent, ensuring functional interchangeability within the constraints of PCB hole pattern design.

Frequently Asked Questions (FAQ)

Q: Can TAP225K050HSB replace TAP225K050GSB in any application?

A: Electrical and thermal performance are identical. Substitution is valid only if the PCB hole pattern accommodates the 0.250" (6.35mm) lead spacing of the TAP225K050HSB. The TAP225K050GSB requires 0.125" (3.18mm) spacing.

Q: Are there differences in reliability or lifetime between these parts?

A: No. Both parts specify 1000 hours lifetime at 85°C and operate across the identical temperature range of -55°C to 125°C.

Q: What determines whether these parts are substitutable?

A: Substitution is valid when capacitance (2.2 µF), tolerance (±10%), rated voltage (50 V), ESR (4.6 Ohm), conformal coating type, and operating temperature range remain unchanged. Lead spacing is a mechanical constraint that must match PCB design.

Q: Do both parts meet the same compliance standards?

A: Yes. Both TAP225K050GSB and TAP225K050HSB are ROHS3 compliant, REACH unaffected, and classified as EAR99 for export control purposes.

Q: Is there an inventory or availability difference between these substitutes?

A: Inventory levels are independent of substitution eligibility. Current availability should be confirmed through component distribution channels.