TAP156K016GSB Equivalent & Substitute Parts

Part Overview

The TAP156K016GSB is a 15 µF conformal coated tantalum capacitor rated at 16 V with radial through-hole mounting. Manufactured by KYOCERA AVX, this component is classified as Active product status and is designed for general-purpose applications requiring reliable energy storage in compact form factors. Substitute parts become necessary when the primary part number experiences supply constraints, extended lead times, or inventory depletion, while maintaining identical electrical and mechanical performance specifications.

Substiute Parts

TAP156K016GSB

KYOCERA AVXIn Stock: 908TAP156K016GSB Datasheet

Current PartRFQ

TAP156K016CCS

KYOCERA AVXIn Stock: 2591TAP156K016CCS Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TAP156K016GSB is determined by strict equivalence across the following critical parameters:

• Capacitance Value: 15 µF (exact match required)
• Tolerance: ±10% (exact match required)
• Voltage Rating: 16 V (exact match required)
• Type: Conformal Coated (exact match required)
• ESR: 2.5 Ohm (exact match required)
• Operating Temperature Range: -55°C to 125°C (exact match required)
• Mounting Type: Through Hole (exact match required)
• Package / Case: Radial (exact match required)
• RoHS Compliance: ROHS3 Compliant (exact match required)

The substitute part TAP156K016CCS meets all electrical and mechanical equivalence criteria. Physical dimensions remain identical except for lead spacing, which differs from 0.125" (3.18 mm) to 0.197" (5.00 mm). This variation is within acceptable tolerance for through-hole radial component placement on standard PCB layouts.

Parameter Comparison

Engineering Selection Recommendations

Both TAP156K016GSB and TAP156K016CCS are Active product status components manufactured by KYOCERA AVX and maintain full ROHS3 compliance. Selection between these parts is based on PCB layout requirements and lead spacing accommodation. The TAP156K016CCS offers increased inventory availability (2519 Pcs vs. 809 Pcs) while maintaining identical electrical performance and thermal characteristics. Lead spacing difference of 0.072" (1.82 mm) must be verified against PCB pad layout specifications prior to component selection.

Frequently Asked Questions (FAQ)

Q: Can TAP156K016CCS replace TAP156K016GSB in existing designs?

A: Yes, provided PCB pad spacing accommodates the 0.197" (5.00 mm) lead spacing of the substitute part. All electrical parameters, thermal ratings, and compliance certifications are identical.

Q: What is the primary difference between these two part numbers?

A: The lead spacing differs: TAP156K016GSB uses 0.125" (3.18 mm) spacing, while TAP156K016CCS uses 0.197" (5.00 mm) spacing. All other specifications remain equivalent.

Q: Are both parts suitable for high-temperature applications?

A: Yes. Both components operate across the -55°C to 125°C temperature range with 1000 hours lifetime rating at 85°C, meeting identical thermal performance requirements.

Q: Do both parts meet RoHS requirements?

A: Yes. Both TAP156K016GSB and TAP156K016CCS are ROHS3 compliant and REACH unaffected.

Q: Which part should be selected for new designs?

A: Selection depends on PCB layout constraints. Verify lead spacing compatibility with your board design before component procurement.