TAP107M016SCS Equivalent & Substitute Parts

Part Overview

The TAP107M016SCS is a 100 µF conformal coated tantalum capacitor rated at 16 V with radial through-hole mounting. Manufactured by KYOCERA AVX, this component is classified as Active product status and is designed for general purpose applications requiring reliable energy storage in compact form factors. Substitute parts become necessary when the primary part number experiences supply constraints, inventory limitations, or when design flexibility permits alternative packaging configurations while maintaining electrical and mechanical compatibility.

Substiute Parts

TAP107M016SCS

KYOCERA AVXIn Stock: 749TAP107M016SCS Datasheet

Current PartRFQ

TAP107M016CCS

KYOCERA AVXIn Stock: 1306TAP107M016CCS Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TAP107M016SCS is determined by strict equivalence across the following critical parameters:

• Capacitance value: 100 µF (exact match required)
• Voltage rating: 16 V (exact match required)
• Tolerance: ±20% (exact match required)
• Type: Conformal Coated (exact match required)
• ESR: 800 mOhm (exact match required)
• Operating temperature range: -55°C to 125°C (exact match required)
• Lifetime specification: 1000 Hrs @ 85°C (exact match required)
• Mounting type: Through Hole Radial (exact match required)
• Physical dimensions: 0.354" Dia (9.00 mm), Height 0.630" (16.00 mm) (exact match required)
• RoHS compliance: ROHS3 Compliant (exact match required)

The TAP107M016CCS qualifies as a direct substitute based on full alignment with all electrical and mechanical parameters. The primary difference is lead spacing configuration (0.197" vs. 0.098"), which represents a mechanical variation within the same product family and does not affect electrical performance or functional compatibility in applications where lead spacing tolerance permits this variation.

Parameter Comparison

Engineering Selection Recommendations

Both TAP107M016SCS and TAP107M016CCS maintain Active product status with KYOCERA AVX, ensuring continued manufacturer support and supply chain stability. Both components are ROHS3 Compliant and REACH Unaffected, meeting current environmental and regulatory requirements for industrial and commercial applications.

Selection between these parts should be based on PCB layout requirements and lead spacing compatibility. The TAP107M016SCS features 0.098" (2.50 mm) lead spacing, while the TAP107M016CCS provides 0.197" (5.00 mm) lead spacing. Verify that your PCB design accommodates the lead spacing of the selected part number. Both components deliver identical electrical performance and thermal characteristics.

Frequently Asked Questions (FAQ)

Q: Can TAP107M016CCS replace TAP107M016SCS in my design?

A: Yes, provided your PCB layout accommodates the 0.197" (5.00 mm) lead spacing of the TAP107M016CCS. All electrical parameters, thermal ratings, and compliance certifications are identical between the two parts.

Q: What is the difference between these two part numbers?

A: The primary difference is lead spacing. TAP107M016SCS uses 0.098" (2.50 mm) spacing, while TAP107M016CCS uses 0.197" (5.00 mm) spacing. Electrical performance, capacitance, voltage rating, ESR, and operating temperature range are identical.

Q: Are both parts ROHS3 compliant?

A: Yes, both TAP107M016SCS and TAP107M016CCS are ROHS3 Compliant and REACH Unaffected.

Q: What is the operating temperature range for these capacitors?

A: Both parts operate across -55°C to 125°C with a lifetime specification of 1000 hours at 85°C.

Q: Does lead spacing affect electrical performance?

A: No. Lead spacing is a mechanical characteristic that affects PCB layout compatibility only. Electrical performance, including capacitance, voltage rating, ESR, and frequency response, remains unchanged.

Q: Can I use either part interchangeably on the same PCB?

A: Only if your PCB design permits both lead spacing configurations. Verify hole spacing on your board before selecting either part number.