TAP107K016SCS Equivalent & Substitute Parts

Part Overview

The TAP107K016SCS is a 100 µF conformal coated tantalum capacitor rated at 16 V with radial through-hole mounting. Manufactured by KYOCERA AVX, this component is classified as Active product status and is ROHS3 compliant. Substitute parts may be required due to inventory constraints, lead time considerations, or specific packaging requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

TAP107K016SCS

KYOCERA AVXIn Stock: 1007TAP107K016SCS Datasheet

Current PartRFQ

TAP107K016CCS

KYOCERA AVXIn Stock: 2967TAP107K016CCS Datasheet

MFR RecommendedRFQ

T350L107K016AT

KEMETIn Stock: 4703T350L107K016AT Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TAP107K016SCS is determined by strict equivalence across the following critical parameters:

• Capacitance: 100 µF (exact match required)
• Tolerance: ±10% (exact match required)
• Voltage Rating: 16 V (exact match required)
• Type: Conformal Coated (exact match required)
• ESR: 800 mOhm (exact match required)
• Operating Temperature: -55°C to 125°C (exact match required)
• Mounting Type: Through Hole Radial (exact match required)
• RoHS Compliance: ROHS3 Compliant (exact match required)

The identified substitute parts meet all electrical and mechanical parameters. Variations in lead spacing and physical dimensions are within acceptable tolerances for through-hole radial mounting applications.

Parameter Comparison

Engineering Selection Recommendations

All three parts maintain Active product status and ROHS3 compliance, ensuring regulatory and supply chain continuity. The TAP107K016CCS is a direct KYOCERA AVX alternative with identical electrical specifications and physical dimensions, differing only in lead spacing (5.00 mm vs. 2.50 mm) and packaging format (Bulk vs. standard). The T350L107K016AT from KEMET's UltraDip II series provides cross-manufacturer equivalence with marginally smaller diameter (8.90 mm vs. 9.00 mm) and standard 5.08 mm lead spacing. Selection should be based on PCB layout requirements, lead spacing compatibility, and inventory availability.

Frequently Asked Questions (FAQ)

Q: Can TAP107K016CCS be used as a direct replacement for TAP107K016SCS?

A: Yes. Both parts share identical electrical specifications (100 µF, ±10%, 16 V, 800 mOhm ESR, -55°C to 125°C). The primary difference is lead spacing: TAP107K016SCS uses 2.50 mm spacing while TAP107K016CCS uses 5.00 mm spacing. PCB layout compatibility must be verified before substitution.

Q: What are the key differences between KYOCERA AVX and KEMET alternatives?

A: Both manufacturers provide equivalent electrical performance. The T350L107K016AT (KEMET) has a slightly smaller diameter (8.90 mm vs. 9.00 mm) and uses 5.08 mm lead spacing. All three parts maintain identical voltage rating, capacitance, tolerance, and operating temperature range.

Q: Are there any compliance or certification differences?

A: All three parts are ROHS3 compliant, REACH unaffected, and classified under ECCN EAR99. No compliance barriers exist for substitution.

Q: Does lead spacing affect electrical performance?

A: Lead spacing is a mechanical parameter that affects PCB layout and mounting only. It does not alter electrical characteristics. Selection depends on PCB hole spacing design.

Q: Can these parts be used interchangeably in high-reliability applications?

A: All parts meet the specified operating temperature range (-55°C to 125°C) and ESR requirements (800 mOhm). Selection should be based on application-specific reliability requirements and manufacturer qualification status for your end-use application.