TAP107K010HSB Equivalent & Substitute Parts

Part Overview

The TAP107K010HSB is a 100 µF conformal coated tantalum capacitor rated at 10 V with radial through-hole mounting. Manufactured by KYOCERA AVX, this component is classified as Active product status and is designed for general purpose applications requiring reliable energy storage in compact form factors. Substitute parts become necessary when primary inventory is unavailable, when lead times require alternative sourcing, or when design flexibility permits equivalent electrical and mechanical specifications.

Substiute Parts

TAP107K010HSB

KYOCERA AVXIn Stock: 878TAP107K010HSB Datasheet

Current PartRFQ

T356J107K010AT

KEMETIn Stock: 86277T356J107K010AT Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TAP107K010HSB is determined by strict equivalence across the following critical parameters:

• Electrical Specifications: Capacitance value (100 µF), tolerance (±10%), rated voltage (10 V), and ESR (1 Ohm) must match exactly
• Environmental Specifications: Operating temperature range (-55°C ~ 125°C) and conformal coating type must be maintained
• Mechanical Specifications: Through-hole radial mounting configuration is required for PCB compatibility
• Regulatory Compliance: ROHS3 compliance and REACH unaffected status must be preserved

The KEMET T356J107K010AT meets all substitution criteria within these parameters. Both components share identical electrical ratings, temperature performance, and regulatory certifications. Physical dimensions vary slightly (diameter and lead spacing), which is acceptable within industry standards for radial through-hole tantalum capacitors of this class.

Parameter Comparison

Engineering Selection Recommendations

Both the TAP107K010HSB and T356J107K010AT are Active product status components with full ROHS3 compliance and REACH unaffected certification. Selection between these parts is based on availability and supply chain requirements rather than electrical performance differentiation.

The KEMET T356J107K010AT offers significantly higher inventory availability (86,200 pcs vs. 868 pcs), making it the preferred choice for high-volume production or when lead time optimization is critical. Both components deliver identical electrical performance and temperature stability across the specified operating range.

Physical dimension variations (diameter 8.40mm vs. 8.50mm; lead spacing 5.08mm vs. 6.35mm) are within acceptable tolerances for radial through-hole PCB layouts. PCB footprint verification is necessary prior to implementation to confirm lead spacing compatibility with existing pad patterns.

Frequently Asked Questions (FAQ)

Q: Can T356J107K010AT be used as a direct replacement for TAP107K010HSB?

A: Yes, provided PCB footprint accommodates the lead spacing difference (5.08mm vs. 6.35mm). Electrical specifications, temperature performance, and regulatory compliance are identical.

Q: What is the significance of the conformal coating on these capacitors?

A: Conformal coating provides environmental protection against moisture, salt spray, and contaminants. Both parts maintain this specification, ensuring equivalent reliability in harsh operating conditions.

Q: Are there any temperature derating considerations between these parts?

A: Both components operate across -55°C ~ 125°C with identical specifications. No derating differences exist between the two parts.

Q: How do the ESR values affect circuit performance?

A: Both parts specify 1 Ohm ESR, ensuring equivalent impedance characteristics and ripple current handling. No performance differentiation exists in this parameter.

Q: What is the impact of lead spacing differences on PCB design?

A: Lead spacing (6.35mm vs. 5.08mm) affects pad pattern layout. Existing PCB designs must be verified for compatibility. The smaller lead spacing of the KEMET part may allow for more compact layouts if PCB redesign is feasible.

Q: Are both parts suitable for high-reliability applications?

A: Both components carry ROHS3 compliance and REACH unaffected status, meeting regulatory requirements for high-reliability applications. Specific application requirements should be evaluated against the provided specifications.