TAP106M035SCS Equivalent & Substitute Parts

Part Overview

The TAP106M035SCS is a 10 µF conformal coated tantalum capacitor rated for 35 V with ±20% tolerance, manufactured by KYOCERA AVX in the TAP series. This through-hole radial component operates across -55°C to 125°C with a 1000-hour lifetime rating at 85°C. The part is Active status and ROHS3 compliant, making it suitable for general-purpose applications requiring reliable energy storage in compact form factors.

Equivalent and substitute parts are identified when design requirements allow tolerance relaxation, voltage derating, or packaging format changes while maintaining the same capacitance value and core electrical performance characteristics.

Substiute Parts

TAP106M035SCS

KYOCERA AVXIn Stock: 892TAP106M035SCS Datasheet

Current PartRFQ

TAP106K035DTW

KYOCERA AVXIn Stock: 1711TAP106K035DTW Datasheet

UpgradeRFQ

TAP106K035SCS

KYOCERA AVXIn Stock: 1905TAP106K035SCS Datasheet

UpgradeRFQ

TAP106M006SCS

KYOCERA AVXIn Stock: 2386TAP106M006SCS Datasheet

MFR RecommendedRFQ

199D106X0035D1V1E3

Vishay SpragueIn Stock: 1718199D106X0035D1V1E3 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TAP106M035SCS is determined by the following criteria:

Primary Substitution Parameters (Must Match):

• Capacitance: 10 µF (exact match required)
• Voltage Rating: 35 V minimum (equal or higher acceptable)
• Mounting Type: Through Hole
• Package Type: Radial
• Operating Temperature Range: -55°C ~ 125°C minimum
• Type: Conformal Coated
• RoHS Compliance: ROHS3 Compliant

Secondary Substitution Parameters (Allowable Variation):

• Tolerance: ±20% or tighter (±10% acceptable as upgrade)
• ESR: 2 Ohm or lower (lower ESR acceptable)
• Packaging Format: Bulk or Cut Tape (CT)
• Manufacturer: KYOCERA AVX or equivalent qualified manufacturer

Non-Substitutable Parameters:

• Capacitance value
• Minimum voltage rating
• Mounting technology (through-hole only)
• Operating temperature range

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalents (Full Substitution):

TAP106K035DTW and TAP106K035SCS are direct equivalents to TAP106M035SCS. Both maintain identical voltage rating (35 V), capacitance (10 µF), physical dimensions, and operating temperature range. The tolerance improvement from ±20% to ±10% represents an upgrade in capacitance accuracy. TAP106K035DTW is supplied in Cut Tape (CT) packaging, while TAP106K035SCS is supplied in Bulk. Both are Active status and ROHS3 compliant.

Cross-Manufacturer Equivalent:

199D106X0035D1V1E3 (Vishay Sprague TANTALEX™ 199D series) is a functional equivalent with matching 10 µF capacitance, 35 V rating, ±20% tolerance, and identical operating temperature range. Physical dimensions are equivalent (0.236" diameter, radial package). This part is Active status and ROHS3 compliant, enabling cross-manufacturer substitution where supply chain diversification is required.

Voltage-Derated Substitute:

TAP106M006SCS is a manufacturer-recommended substitute only when circuit design permits voltage derating from 35 V to 6.3 V. This part maintains 10 µF capacitance, ±20% tolerance, and conformal coating. Physical size is reduced (0.177" diameter vs. 0.236"), and ESR increases to 6 Ohm. This substitution is valid only for applications where the 6.3 V rating meets or exceeds the actual operating voltage requirement.

Frequently Asked Questions (FAQ)

Q: Can TAP106K035DTW replace TAP106M035SCS directly?

A: Yes. TAP106K035DTW is a direct substitute with identical electrical and mechanical specifications. The ±10% tolerance is tighter than the original ±20%, representing improved capacitance accuracy. The only difference is packaging format (Cut Tape vs. Bulk).

Q: What is the difference between TAP106K035DTW and TAP106K035SCS?

A: Both parts are electrically and mechanically identical. TAP106K035DTW is supplied in Cut Tape (CT) packaging for automated assembly, while TAP106K035SCS is supplied in Bulk packaging. Selection depends on assembly process requirements.

Q: Can 199D106X0035D1V1E3 be used as a substitute?

A: Yes, 199D106X0035D1V1E3 is a cross-manufacturer equivalent from Vishay Sprague. It matches the 10 µF capacitance, 35 V rating, ±20% tolerance, and operating temperature range. Use this part when cross-manufacturer sourcing or supply chain redundancy is required.

Q: When can TAP106M006SCS be used as a substitute?

A: TAP106M006SCS is a manufacturer-recommended substitute only when the circuit design permits voltage derating to 6.3 V. The capacitance remains 10 µF, but the voltage rating is significantly lower. Do not use this part in applications requiring 35 V rating. The reduced physical size (0.177" diameter) may affect PCB layout compatibility.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. TAP106K035DTW, TAP106K035SCS, TAP106M006SCS, and 199D106X0035D1V1E3 are all ROHS3 compliant, matching the compliance status of the original TAP106M035SCS.

Q: What is the impact of ESR differences between substitute parts?

A: TAP106M035SCS, TAP106K035DTW, and TAP106K035SCS all have 2 Ohm ESR. TAP106M006SCS has 6 Ohm ESR, which may affect ripple current performance in high-frequency applications. 199D106X0035D1V1E3 does not specify ESR. For applications sensitive to ESR, maintain parts with 2 Ohm specification.

Q: Can packaging format affect circuit performance?

A: Packaging format (Bulk vs. Cut Tape) does not affect electrical performance. Selection is based on assembly process requirements. Cut Tape (CT) is optimized for automated pick-and-place assembly, while Bulk packaging is suitable for manual assembly or alternative handling methods.