TAP106M035GSB Equivalent & Substitute Parts

Part Overview

The TAP106M035GSB is a 10 µF conformal coated tantalum capacitor rated for 35 V with ±20% tolerance, manufactured by KYOCERA AVX in the TAP series. This radial through-hole component is designed for general-purpose applications requiring reliable performance across the -55°C to 125°C operating temperature range. As an active product with ROHS3 compliance and REACH unaffected status, equivalent and substitute parts are available within the same series to accommodate varying tolerance requirements and lead spacing specifications.

Substiute Parts

TAP106M035GSB

KYOCERA AVXIn Stock: 1115TAP106M035GSB Datasheet

Current PartRFQ

TAP106K035GSB

KYOCERA AVXIn Stock: 2083TAP106K035GSB Datasheet

UpgradeRFQ

TAP106M035CCS

KYOCERA AVXIn Stock: 2038TAP106M035CCS Datasheet

MFR RecommendedRFQ

TAP106M035HSB

KYOCERA AVXIn Stock: 1559TAP106M035HSB Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TAP106M035GSB is determined by the following parameters:

Critical Parameters (Must Match):

• Capacitance: 10 µF
• Voltage Rating: 35 V
• Type: Conformal Coated Tantalum
• ESR: 2 Ohm
• Mounting Type: Through Hole Radial
• Operating Temperature Range: -55°C to 125°C
• Lifetime @ 85°C: 1000 Hours

Variable Parameters (Allowed to Differ):

• Tolerance: ±20% or ±10%
• Lead Spacing: 0.125" (3.18mm), 0.197" (5.00mm), or 0.250" (6.35mm)

The TAP106M035GSB has three qualified substitutes within the KYOCERA AVX TAP series, each maintaining identical electrical performance while offering different tolerance grades and lead spacing configurations.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts maintain active product status and ROHS3 compliance with REACH unaffected designation, ensuring regulatory consistency with the original TAP106M035GSB specification.

TAP106K035GSB provides tighter tolerance control at ±10% while maintaining identical lead spacing (0.125"), making it suitable for applications requiring improved capacitance accuracy without PCB layout modifications.

TAP106M035CCS retains the ±20% tolerance specification with increased lead spacing (0.197"), accommodating PCB designs with wider pad spacing while preserving all electrical characteristics.

TAP106M035HSB maintains ±20% tolerance with maximum lead spacing (0.250"), designed for applications requiring the largest pitch configuration within the equivalent parts group.

Selection between these substitutes depends solely on PCB layout requirements and tolerance specifications. All parts share identical capacitance, voltage rating, ESR, and thermal performance characteristics.

Frequently Asked Questions (FAQ)

Q: Can TAP106K035GSB replace TAP106M035GSB directly?

A: Yes. TAP106K035GSB is electrically equivalent with improved tolerance (±10% versus ±20%). Both parts share identical lead spacing (0.125"), voltage rating (35 V), capacitance (10 µF), and ESR (2 Ohm). The tighter tolerance does not create compatibility issues in applications designed for the original part.

Q: What is the difference between the lead spacing options?

A: Lead spacing varies across the substitute group: TAP106M035GSB and TAP106K035GSB use 0.125" (3.18mm), TAP106M035CCS uses 0.197" (5.00mm), and TAP106M035HSB uses 0.250" (6.35mm). Selection depends on PCB pad spacing design. All other electrical parameters remain constant.

Q: Are all substitutes ROHS3 compliant?

A: Yes. All parts in this group—TAP106M035GSB, TAP106K035GSB, TAP106M035CCS, and TAP106M035HSB—carry ROHS3 compliance and REACH unaffected status.

Q: Does tolerance grade affect circuit performance?

A: Tolerance grade determines capacitance accuracy. TAP106K035GSB (±10%) provides tighter capacitance control compared to the ±20% tolerance of TAP106M035GSB, TAP106M035CCS, and TAP106M035HSB. Circuit design requirements determine whether tighter tolerance is necessary.

Q: Can I use TAP106M035CCS or TAP106M035HSB if my PCB is designed for 0.125" lead spacing?

A: No. Lead spacing is a mechanical parameter determined by PCB pad layout. Using a part with different lead spacing will result in installation failure. Select the substitute matching your PCB design specifications.