TAP105M050GSB Equivalent & Substitute Parts

Part Overview

The TAP105M050GSB is a 1 µF conformal coated tantalum capacitor rated for 50 V with radial through-hole mounting. This component is part of the TAP series from KYOCERA AVX and maintains Active product status. Equivalent and substitute parts are identified based on matching electrical specifications and mechanical compatibility within the TAP series product line.

Substiute Parts

TAP105M050GSB

KYOCERA AVXIn Stock: 1093TAP105M050GSB Datasheet

Current PartRFQ

TAP105M050BRW

KYOCERA AVXIn Stock: 1943TAP105M050BRW Datasheet

MFR RecommendedRFQ

TAP105M050FCS

KYOCERA AVXIn Stock: 1275TAP105M050FCS Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TAP105M050GSB are qualified based on the following criteria:

• Identical capacitance value: 1 µF
• Identical tolerance: ±20%
• Identical voltage rating: 50 V
• Identical type: Conformal Coated
• Identical ESR: 8 Ohm
• Identical operating temperature range: -55°C ~ 125°C
• Identical lifetime specification: 1000 Hrs @ 85°C
• Identical mounting type: Through Hole
• Identical package type: Radial
• Identical diameter: 0.197" (5.00mm)
• Identical manufacturer size code: C
• Identical compliance status: ROHS3 Compliant

Variations in packaging format (Bulk vs. Cut Tape) and minor mechanical dimensions (height and lead spacing) do not affect electrical equivalency.

Parameter Comparison

Engineering Selection Recommendations

All three parts—TAP105M050GSB, TAP105M050BRW, and TAP105M050FCS—are electrically and mechanically equivalent. Selection between them is determined by packaging and availability requirements:

• TAP105M050GSB and TAP105M050FCS are supplied in Bulk packaging, suitable for high-volume assembly operations.
• TAP105M050BRW is supplied in Cut Tape (CT) format, appropriate for automated pick-and-place equipment.

All parts maintain Active product status and ROHS3 compliance. No electrical performance differences exist between the three variants.

Frequently Asked Questions (FAQ)

Q: Can TAP105M050BRW replace TAP105M050GSB in a circuit design?

A: Yes. Both parts are electrically identical with matching capacitance, voltage rating, tolerance, ESR, and temperature specifications. The difference is packaging format only.

Q: What is the significance of the packaging format difference between Bulk and Cut Tape?

A: Packaging format affects handling and assembly processes. Bulk packaging is typical for manual assembly or wave soldering. Cut Tape packaging is designed for automated pick-and-place assembly systems. Electrical performance is identical.

Q: Are there any mechanical compatibility concerns when substituting these parts?

A: No. All three parts share identical radial package dimensions: 0.197" diameter (5.00mm). Minor variations in height and lead spacing do not affect PCB footprint compatibility for standard radial through-hole designs.

Q: Do all substitute parts meet the same compliance standards?

A: Yes. TAP105M050GSB, TAP105M050BRW, and TAP105M050FCS are all ROHS3 compliant and REACH unaffected.