TAP104K035GSB Equivalent & Substitute Parts

Part Overview

The TAP104K035GSB is a 0.1 µF conformal coated tantalum capacitor rated for 35 V operation in radial through-hole configuration. This component is manufactured by KYOCERA AVX and maintains Active product status with full RoHS3 compliance. Substitute parts are identified when inventory constraints, lead time requirements, or procurement preferences necessitate alternative sourcing while maintaining electrical and mechanical compatibility within the specified parameter envelope.

Substiute Parts

TAP104K035GSB

KYOCERA AVXIn Stock: 1103TAP104K035GSB Datasheet

Current PartRFQ

TAP104K035CCS

KYOCERA AVXIn Stock: 3964TAP104K035CCS Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TAP104K035GSB is determined by strict equivalence across the following critical parameters:

• Capacitance value: 0.1 µF (exact match required)
• Tolerance: ±10% (exact match required)
• Voltage rating: 35 V (exact match required)
• Type: Conformal Coated (exact match required)
• ESR: 26 Ohm (exact match required)
• Operating temperature range: -55°C to 125°C (exact match required)
• Lifetime specification: 1000 Hrs @ 85°C (exact match required)
• Mounting type: Through Hole (exact match required)
• Package: Radial (exact match required)
• Diameter: 0.177" (4.50 mm) (exact match required)
• Height: 0.335" (8.50 mm) (exact match required)
• RoHS compliance: ROHS3 Compliant (exact match required)

The TAP104K035CCS meets all substitution criteria and is classified as a manufacturer-recommended equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both TAP104K035GSB and TAP104K035CCS are Active products manufactured by KYOCERA AVX with full ROHS3 compliance and REACH unaffected status. Selection between these parts is based on lead spacing requirements and inventory availability. The TAP104K035GSB features 0.125" (3.18 mm) lead spacing, while the TAP104K035CCS provides 0.197" (5.00 mm) lead spacing. PCB layout and hole spacing specifications determine which lead spacing configuration is appropriate for the application. Both parts satisfy identical electrical performance and thermal operating requirements.

Frequently Asked Questions (FAQ)

Q: Can TAP104K035CCS replace TAP104K035GSB in existing designs?

A: Electrical substitution is valid when PCB hole spacing accommodates the 0.197" (5.00 mm) lead spacing of the TAP104K035CCS. The TAP104K035GSB uses 0.125" (3.18 mm) lead spacing. Physical board layout verification is required prior to substitution.

Q: Are there differences in reliability or lifetime between these parts?

A: Both parts specify identical lifetime ratings of 1000 Hrs @ 85°C and operate across the same temperature range of -55°C to 125°C. No reliability differentiation exists between the two part numbers.

Q: What is the significance of lead spacing in capacitor selection?

A: Lead spacing determines PCB hole positioning and pad layout. The TAP104K035GSB (0.125" spacing) and TAP104K035CCS (0.197" spacing) require different board designs. Incorrect lead spacing selection results in physical incompatibility with the PCB footprint.

Q: Are both parts RoHS compliant?

A: Yes. Both TAP104K035GSB and TAP104K035CCS are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.

Q: What determines whether a tantalum capacitor qualifies as a substitute?

A: Substitution requires exact equivalence across capacitance, tolerance, voltage rating, type, ESR, temperature range, lifetime specification, mounting configuration, package dimensions, and compliance certifications. Any deviation in these parameters disqualifies a part from substitution status.