TACL335M006R Equivalent & Substitute Parts

Part Overview

The TACL335M006R is a 3.3 µF molded tantalum capacitor manufactured by KYOCERA AVX, rated for 6.3 V operation in a 0603 (1608 Metric) surface mount package. This component is classified as Active product status and is RoHS3 compliant. Substitute parts are identified when equivalent capacitance and physical package dimensions are maintained while allowing variations in voltage rating, tolerance, and series designation within the molded tantalum capacitor category.

Substiute Parts

TACL335M006R

KYOCERA AVXIn Stock: 988TACL335M006R Datasheet

Current PartRFQ

TACL335K010XTA

KYOCERA AVXIn Stock: 4257TACL335K010XTA Datasheet

UpgradeRFQ

TACL335M010XTA

KYOCERA AVXIn Stock: 4639TACL335M010XTA Datasheet

UpgradeRFQ

TLCL335M016RTA

KYOCERA AVXIn Stock: 6107TLCL335M016RTA Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TACL335M006R are qualified based on the following criteria:

Maintained Parameters (Non-Negotiable):

• Capacitance: 3.3 µF (exact match required)
• Package / Case: 0603 (1608 Metric) (physical compatibility required)
• Type: Molded tantalum capacitor
• ESR: 7.5 Ohm (electrical performance match)
• Operating Temperature: -55°C ~ 125°C (thermal range match)
• Mounting Type: Surface Mount

Allowed Variations:

• Voltage - Rated: May be increased above 6.3 V (higher voltage rating provides design margin)
• Tolerance: May be tightened from ±20% to ±10% (improved accuracy)
• Series Designation: TAC or TLC series acceptable
• Moisture Sensitivity Level: May vary (1 or 3)

The three substitute parts listed below meet all maintained parameters while offering enhanced voltage ratings and/or improved tolerance specifications.

Parameter Comparison

Engineering Selection Recommendations

All four parts—the original TACL335M006R and the three substitute options (TACL335K010XTA, TACL335M010XTA, TLCL335M016RTA)—maintain Active product status and ROHS3 compliance. Selection among these parts depends on circuit voltage requirements and tolerance specifications:

TACL335K010XTA provides a 10 V voltage rating with improved ±10% tolerance, suitable for applications requiring tighter capacitance accuracy within a 10 V operating envelope.

TACL335M010XTA offers a 10 V voltage rating while maintaining the ±20% tolerance of the original part, providing voltage margin without tolerance modification.

TLCL335M016RTA delivers the highest voltage rating at 16 V with ±20% tolerance, appropriate for applications requiring maximum voltage headroom. This part operates under MSL 3 (168 Hours) moisture sensitivity, compared to MSL 1 (Unlimited) for the other three parts.

All substitute parts maintain identical physical dimensions, ESR characteristics, and operating temperature range, ensuring direct mechanical and thermal compatibility.

Frequently Asked Questions (FAQ)

Q: Can TACL335K010XTA replace TACL335M006R in any application?

A: TACL335K010XTA is a direct substitute from a mechanical and electrical standpoint. The 10 V rating exceeds the original 6.3 V specification, providing additional voltage margin. The ±10% tolerance is tighter than the original ±20%, improving capacitance accuracy. Substitution is valid for circuits operating at or below 10 V.

Q: What is the difference between TACL335M010XTA and TACL335K010XTA?

A: Both parts share identical voltage (10 V), package (0603), and physical dimensions. The primary difference is tolerance: TACL335K010XTA specifies ±10%, while TACL335M010XTA specifies ±20%. Selection depends on whether the circuit requires tighter capacitance tolerance.

Q: Why does TLCL335M016RTA have a different series designation (TLC vs. TAC)?

A: TLCL335M016RTA belongs to the TLC series rather than the TAC series. Both are molded tantalum capacitors from KYOCERA AVX with identical electrical and mechanical specifications for this 3.3 µF, 0603 package configuration. The series designation reflects internal manufacturing or product line categorization but does not affect functional compatibility.

Q: Is TLCL335M016RTA suitable for high-reliability applications?

A: TLCL335M016RTA maintains ROHS3 compliance and Active product status. However, it operates under MSL 3 (168 Hours) moisture sensitivity, compared to MSL 1 (Unlimited) for the other three parts. Applications with extended storage or exposure to high-humidity environments should account for this moisture sensitivity specification during component handling and storage.

Q: Can all substitute parts be used interchangeably in the same PCB assembly?

A: Yes, all substitute parts maintain identical physical dimensions (0.063" L x 0.033" W, 1.00mm max height), package type (0603), and mounting method (Surface Mount). PCB footprints and assembly processes require no modification. Voltage and tolerance differences are circuit-dependent considerations, not physical compatibility issues.

Q: What inventory levels are available for each part?

A: TACL335M006R: 897 Pcs; TACL335K010XTA: 4202 Pcs; TACL335M010XTA: 4622 Pcs; TLCL335M016RTA: 6010 Pcs.