TA-24.000MBE-T MEMS Oscillator Equivalent & Substitute Parts

Part Overview

The TA-24.000MBE-T is a 24 MHz MEMS-based XO (Standard) oscillator manufactured by TXC CORPORATION. This component operates at 3.3V with CMOS output, Enable/Disable function, and is housed in a 4-SMD, No Lead surface mount package. The part is classified as Obsolete, making identification of functionally equivalent active alternatives necessary for ongoing design support and procurement.

Substiute Parts

TA-24.000MBE-T

TXC CORPORATIONIn Stock: 978TA-24.000MBE-T Datasheet

Current PartRFQ

510CAA24M0000AAGR

Skyworks Solutions Inc.In Stock: 722510CAA24M0000AAGR Datasheet

DirectRFQ

510CAB24M0000AAGR

Skyworks Solutions Inc.In Stock: 1031510CAB24M0000AAGR Datasheet

DirectRFQ

CPPC7L-A7BP-24.0TS

Cardinal Components Inc.In Stock: 884CPPC7L-A7BP-24.0TS Datasheet

DirectRFQ

CPPC7LZ-A7BP-24.0TS

Cardinal Components Inc.In Stock: 901CPPC7LZ-A7BP-24.0TS Datasheet

DirectRFQ

SXO75C3A481-24.000M

Suntsu Electronics, Inc.In Stock: 4142SXO75C3A481-24.000M Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TA-24.000MBE-T is determined by strict equivalence across the following parameters:

Critical Matching Parameters:

• Frequency: 24 MHz (exact match required)
• Output Type: CMOS
• Supply Voltage: 3.3V
• Function: Enable/Disable capability
• Frequency Stability: ±50ppm
• Operating Temperature Range: -40°C ~ 85°C
• Package / Case: 4-SMD, No Lead
• Physical Dimensions: 0.276" L x 0.197" W (7.00mm x 5.00mm)
• Mounting Type: Surface Mount

All identified substitute parts meet these criteria. Variations in maximum supply current, seated height, and base resonator type (Crystal vs. MEMS) do not preclude substitution when all critical parameters align.

Parameter Comparison

Engineering Selection Recommendations

Active Status Priority: All substitute parts are classified as Active products, ensuring long-term availability and manufacturing support compared to the Obsolete TA-24.000MBE-T.

Compliance Considerations: The CPPC7L-A7BP-24.0TS and CPPC7LZ-A7BP-24.0TS are RoHS3 Compliant and REACH Unaffected. The SXO75C3A481-24.000M is RoHS3 Compliant and REACH Unaffected. The Skyworks Si510 series parts (510CAA24M0000AAGR and 510CAB24M0000AAGR) carry the same ECCN and HTSUS classifications as the main part.

Height Consideration: The TA-24.000MBE-T has a maximum seated height of 0.039" (1.00mm), which is lower than all substitute options. The SXO75C3A481-24.000M offers the closest height match at 0.063" (1.60mm). PCB layout and component clearance must be evaluated for applications with height constraints.

Current Consumption: The SXO75C3A481-24.000M operates at a maximum supply current of 16mA, lower than the main part's 25mA specification. The Skyworks Si510 series operates at 26mA maximum. For power-sensitive applications, the Suntsu part offers improved efficiency.

Packaging Format: Tape & Reel packaging is available from Skyworks and Cardinal Components. Bulk packaging is available from Suntsu Electronics. Procurement requirements should guide selection based on order quantities and handling procedures.

Frequently Asked Questions (FAQ)

Q: Can I substitute the TA-24.000MBE-T with any of these parts directly?

A: Yes. All listed substitute parts meet the critical electrical and mechanical parameters: 24 MHz frequency, CMOS output, 3.3V supply, Enable/Disable function, ±50ppm stability, -40°C to 85°C operating range, and 4-SMD No Lead package with 7.00mm x 5.00mm footprint. Functional equivalence is confirmed across all parameters provided in the specification.

Q: What is the difference between MEMS and Crystal resonators in these oscillators?

A: The TA-24.000MBE-T uses a MEMS (Micro-Electro-Mechanical Systems) resonator, while all substitute parts use Crystal resonators. Both technologies deliver the same frequency stability (±50ppm), output type (CMOS), and operating characteristics specified for this application. The resonator technology difference does not affect substitution eligibility when all electrical and mechanical parameters match.

Q: Does the height difference matter for my application?

A: The TA-24.000MBE-T has a maximum seated height of 0.039" (1.00mm). Substitute parts range from 0.063" to 0.075" (1.60mm to 1.90mm). If your PCB layout or enclosure has height constraints below 0.063", the SXO75C3A481-24.000M is the closest match. For applications without height restrictions, all substitutes are mechanically compatible.

Q: Which substitute part has the lowest power consumption?

A: The SXO75C3A481-24.000M from Suntsu Electronics operates at a maximum supply current of 16mA, compared to 25mA for the main part and 26mA for the Skyworks Si510 series. For power-constrained applications, this part offers improved efficiency while maintaining all other electrical specifications.

Q: Are there any compliance or regulatory differences between the substitutes?

A: The CPPC7L-A7BP-24.0TS, CPPC7LZ-A7BP-24.0TS, and SXO75C3A481-24.000M are RoHS3 Compliant and REACH Unaffected. All parts share the same ECCN (EAR99) and HTSUS (8542.39.0001) classifications. Moisture Sensitivity Level is 1 (Unlimited) for all parts with specified MSL data.

Q: What packaging options are available?

A: Skyworks Solutions (510CAA24M0000AAGR and 510CAB24M0000AAGR) and Cardinal Components (CPPC7L-A7BP-24.0TS and CPPC7LZ-A7BP-24.0TS) supply parts in Tape & Reel format. Suntsu Electronics (SXO75C3A481-24.000M) supplies in Bulk packaging. Select based on your procurement volume and assembly process requirements.

Q: Can I use these parts interchangeably in the same circuit board design?

A: Yes. All substitute parts share identical footprints (7.00mm x 5.00mm), pin configurations (4-SMD No Lead), electrical specifications (24 MHz, CMOS, 3.3V, Enable/Disable), and operating ranges (-40°C to 85°C). Height variations require verification against PCB clearance and component placement constraints, but electrical interchangeability is confirmed.