T95R337M016LSSL Equivalent & Substitute Parts

Part Overview

The T95R337M016LSSL is a 330 µF conformal coated tantalum capacitor manufactured by Vishay Sprague, rated for 16 V operation in a 2824 (7260 Metric) surface mount package. This component is part of the TANTAMOUNT™ T95 series and maintains active product status. Tantalum capacitors of this specification are used in applications requiring high capacitance density, low ESR, and reliable performance across extended temperature ranges. Substitute parts may be required due to inventory constraints, design optimization for tolerance requirements, or application-specific performance criteria.

Substiute Parts

T95R337M016LSSL

Vishay SpragueIn Stock: 945T95R337M016LSSL Datasheet

Current PartRFQ

T95R337K016LSAL

Vishay SpragueIn Stock: 1576T95R337K016LSAL Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the T95R337M016LSSL is determined by strict equivalence across the following critical parameters:

Capacitance value must remain 330 µF. Voltage rating must be 16 V or higher. Package and case designation must be 2824 (7260 Metric) to ensure mechanical and electrical compatibility. ESR must not exceed 55 mOhm. Operating temperature range must span -55°C to 125°C. Conformal coating type must be maintained. Surface mount mounting type is required.

Tolerance may vary within acceptable ranges provided all other parameters remain equivalent. The substitute part T95R337K016LSAL meets all these criteria with a tighter tolerance specification of ±10% compared to the main part's ±20%.

Parameter Comparison

Engineering Selection Recommendations

Both the T95R337M016LSSL and T95R337K016LSAL are active products from Vishay Sprague with identical electrical and mechanical specifications except for tolerance. The primary distinction is the capacitance tolerance: the main part specifies ±20% while the substitute specifies ±10%.

Selection between these parts depends on circuit requirements for capacitance accuracy. Applications with tighter tolerance requirements should use T95R337K016LSAL. Applications where ±20% tolerance is acceptable may use either part. Both components share identical ESR, voltage rating, package dimensions, and operating temperature range, ensuring direct functional equivalence in circuit design.

Both parts maintain RoHS non-compliant status and identical moisture sensitivity ratings. Inventory availability may also influence selection, as the substitute part shows higher stock levels (1543 Pcs vs. 886 Pcs).

Frequently Asked Questions (FAQ)

Q: Can T95R337K016LSAL replace T95R337M016LSSL in any application?

A: Yes, provided the application does not require the ±20% tolerance specification of the original part. The substitute offers tighter ±10% tolerance, making it suitable for all applications where the original part is used.

Q: Are the physical dimensions identical between these parts?

A: Yes. Both parts use the 2824 (7260 Metric) package with identical dimensions of 0.283" L x 0.236" W (7.20mm x 6.00mm) and maximum seated height of 0.150" (3.80mm). PCB layout and assembly processes require no modification.

Q: What is the significance of the tolerance difference?

A: Tolerance defines the acceptable range of actual capacitance value from the nominal 330 µF specification. The ±20% tolerance allows actual values between 264 µF and 396 µF. The ±10% tolerance allows actual values between 297 µF and 363 µF. Applications requiring precise capacitance values should use the ±10% part.

Q: Are both parts suitable for the same operating temperature range?

A: Yes. Both parts operate across -55°C to 125°C, ensuring equivalent thermal performance in all specified conditions.

Q: What does conformal coating provide?

A: Conformal coating protects the capacitor from moisture, salt spray, and other environmental contaminants. Both parts include this protection with identical 2A moisture sensitivity level (4 Weeks).