T95R337M016LSAL Equivalent & Substitute Parts

Part Overview

The T95R337M016LSAL is a 330 µF conformal coated tantalum capacitor manufactured by Vishay Sprague, rated for 16 V operation. This component belongs to the TANTAMOUNT™ T95 series and is designed for surface mount applications in the 2824 (7260 Metric) package. The part is currently active in production with high reliability ratings and COTS qualification. Substitute parts are identified when equivalent electrical performance can be maintained within the allowed parameter tolerances for this capacitor category.

Substiute Parts

T95R337M016LSAL

Vishay SpragueIn Stock: 937T95R337M016LSAL Datasheet

Current PartRFQ

T95R337K016LSAL

Vishay SpragueIn Stock: 1576T95R337K016LSAL Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the T95R337M016LSAL is determined by strict equivalence in the following parameters:

• Capacitance value: 330 µF (exact match required)
• Voltage rating: 16 V (exact match required)
• Package / Case: 2824 (7260 Metric) (exact match required)
• Mounting type: Surface Mount (exact match required)
• ESR: 55 mOhm (exact match required)
• Type: Conformal Coated (exact match required)
• Operating temperature range: -55°C to 125°C (exact match required)

The T95R337K016LSAL qualifies as a parametric equivalent because it maintains all critical electrical and mechanical parameters. The tolerance specification differs (±10% versus ±20%), which represents a tighter tolerance on the substitute part and does not restrict its use in applications designed for the original part.

Parameter Comparison

Engineering Selection Recommendations

Both the T95R337M016LSAL and T95R337K016LSAL are active production components from Vishay Sprague with identical product status and compliance certifications. The T95R337K016LSAL provides a tighter capacitance tolerance (±10% versus ±20%), which offers improved consistency in applications requiring stricter capacitance control. Both parts carry COTS qualification and identical moisture sensitivity ratings. Selection between these parts should be based on tolerance requirements specific to the application circuit design.

Frequently Asked Questions (FAQ)

Q: Can T95R337K016LSAL replace T95R337M016LSAL in existing designs?

A: Yes. The T95R337K016LSAL maintains all critical electrical parameters including capacitance value, voltage rating, ESR, and operating temperature range. The substitute part features a tighter tolerance specification, which is compatible with applications designed for the original part.

Q: Are the physical dimensions identical?

A: Yes. Both parts use the 2824 (7260 Metric) package with identical length, width, and maximum seated height specifications. Direct board-level substitution is supported without layout modifications.

Q: Do both parts have the same moisture sensitivity rating?

A: Yes. Both parts are rated 2A (4 Weeks) for moisture sensitivity level, requiring identical handling and storage protocols.

Q: What is the primary difference between these two parts?

A: The tolerance specification differs. The T95R337M016LSAL carries ±20% tolerance, while the T95R337K016LSAL carries ±10% tolerance. All other electrical and mechanical parameters are identical.

Q: Are both parts RoHS compliant?

A: No. Both the T95R337M016LSAL and T95R337K016LSAL are RoHS non-compliant and carry identical compliance status.