Equivalent & Substitute Parts for T95R337M016HSSL

Part Overview

The T95R337M016HSSL is a 330 µF conformal coated tantalum capacitor manufactured by Vishay Sprague, rated for 16 V operation in a 2824 (7260 Metric) surface mount package. This component is classified as Active product status and is designed for high-reliability applications requiring conformal coating protection. Substitute parts are identified when equivalent electrical and mechanical parameters align with application requirements, allowing for component interchangeability based on tolerance, compliance, and availability considerations.

Substiute Parts

T95R337M016HSSL

Vishay SpragueIn Stock: 700T95R337M016HSSL Datasheet

Current PartRFQ

T95R337K016LSAL

Vishay SpragueIn Stock: 1576T95R337K016LSAL Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the T95R337M016HSSL is determined by the following critical parameters:

• Capacitance value must equal 330 µF
• Voltage rating must equal or exceed 16 V
• Package / Case must be 2824 (7260 Metric)
• Mounting type must be Surface Mount
• Type must be Conformal Coated
• ESR must equal 55 mOhm
• Operating temperature range must encompass -55°C to 125°C

The substitute part T95R337K016LSAL meets all electrical and mechanical requirements. The primary difference is tolerance specification (±10% versus ±20%), which represents a tighter capacitance tolerance and does not prevent substitution in applications where the main part is specified.

Parameter Comparison

Engineering Selection Recommendations

The T95R337K016LSAL serves as a direct electrical and mechanical substitute for the T95R337M016HSSL. Both components are Active status products from the same manufacturer series with identical capacitance, voltage rating, package dimensions, and ESR specifications.

Selection between these parts should be based on the following criteria:

• If ROHS3 compliance is a mandatory requirement, the T95R337M016HSSL must be specified.
• If tighter capacitance tolerance (±10%) is required for circuit performance, the T95R337K016LSAL is the appropriate choice.
• If RoHS compliance is not a design constraint and standard tolerance (±20%) is acceptable, either part is suitable.
• Availability and inventory status should be evaluated based on project timeline requirements.

Frequently Asked Questions (FAQ)

Q: Can T95R337K016LSAL replace T95R337M016HSSL in all applications?

A: Electrical and mechanical compatibility is confirmed. The substitute part has identical capacitance, voltage rating, ESR, package dimensions, and operating temperature range. The primary difference is RoHS compliance status and capacitance tolerance. Substitution is valid where RoHS3 compliance is not required.

Q: What is the significance of the tolerance difference between ±20% and ±10%?

A: Tolerance defines the acceptable deviation of actual capacitance from the nominal 330 µF value. The ±10% tolerance on the substitute part provides a tighter specification band, which may be beneficial in precision circuits but is not required for basic substitution eligibility.

Q: Are the physical dimensions identical between these parts?

A: Yes. Both components use the 2824 (7260 Metric) package with identical length (0.283" / 7.20mm), width (0.236" / 6.00mm), and maximum seated height (0.150" / 3.80mm). PCB footprints and assembly processes are interchangeable.

Q: Does RoHS compliance affect electrical performance?

A: RoHS compliance relates to material composition and environmental regulations, not electrical performance. Both parts deliver identical electrical characteristics. RoHS status is a regulatory and procurement consideration, not a functional parameter.

Q: Are both parts suitable for the full operating temperature range?

A: Yes. Both components are rated for -55°C to 125°C operation, ensuring compatibility across the specified thermal envelope.