T95R337M016HSAS Equivalent & Substitute Parts

Part Overview

The T95R337M016HSAS is a 330 µF conformal coated tantalum capacitor manufactured by Vishay Sprague, rated for 16 V operation. This component belongs to the TANTAMOUNT™ T95 series and is designed for surface mount applications in the 2824 (7260 Metric) package. The part is currently active in production with high reliability ratings and COTS qualification. Substitute parts are identified when inventory constraints, compliance requirements, or specific performance characteristics necessitate alternative sourcing while maintaining functional equivalence within the allowed parameter tolerances.

Substiute Parts

T95R337M016HSAS

Vishay SpragueIn Stock: 1054T95R337M016HSAS Datasheet

Current PartRFQ

T95R337K016LSAL

Vishay SpragueIn Stock: 1576T95R337K016LSAL Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the T95R337M016HSAS is determined by the following core parameters:

• Capacitance Value: Must be 330 µF (no deviation permitted)
• Voltage Rating: Must be 16 V or higher (equal or greater)
• Package / Case: Must be 2824 (7260 Metric) for mechanical and electrical compatibility
• Mounting Type: Must be Surface Mount
• Type: Must be Conformal Coated
• Operating Temperature Range: Must support -55°C ~ 125°C minimum
• Moisture Sensitivity Level: Must be 2A or better

The substitute part T95R337K016LSAL meets all core substitution criteria. The primary difference is tolerance specification (±10% versus ±20%) and ESR characteristics (55 mOhm versus 110 mOhm), both of which represent improved performance parameters that do not restrict substitution.

Parameter Comparison

Engineering Selection Recommendations

Both the T95R337M016HSAS and T95R337K016LSAL are active production components with COTS qualification and high reliability ratings. The T95R337M016HSAS carries RoHS3 compliance, while the T95R337K016LSAL is RoHS non-compliant. Selection between these parts should be based on regulatory requirements specific to the end application. The T95R337K016LSAL offers superior ESR performance (55 mOhm versus 110 mOhm) and tighter capacitance tolerance (±10% versus ±20%), making it suitable for applications where lower impedance or tighter value control is required. Both parts are mechanically and electrically interchangeable within the specified parameter constraints.

Frequently Asked Questions (FAQ)

Q: Can T95R337K016LSAL be used as a direct replacement for T95R337M016HSAS?

A: Yes. Both parts share identical capacitance (330 µF), voltage rating (16 V), package (2824), mounting type (Surface Mount), conformal coating, operating temperature range (-55°C ~ 125°C), and moisture sensitivity level (2A). The substitute offers improved ESR and tolerance specifications.

Q: What is the difference in tolerance between these parts?

A: The main part has ±20% tolerance, while the substitute has ±10% tolerance. The tighter tolerance of the substitute part provides more precise capacitance values within the specified range.

Q: Does the ESR difference affect circuit performance?

A: ESR (Equivalent Series Resistance) affects impedance characteristics. The substitute part's lower ESR (55 mOhm versus 110 mOhm) results in reduced impedance, which may improve performance in applications sensitive to high-frequency ripple current or transient response.

Q: Are there compliance differences between these parts?

A: The main part (T95R337M016HSAS) is RoHS3 compliant. The substitute part (T95R337K016LSAL) is RoHS non-compliant. Compliance requirements should be verified against end-application regulations before selection.

Q: Are the physical dimensions identical?

A: Yes. Both parts use the 2824 (7260 Metric) package with identical dimensions: 0.283" L x 0.236" W (7.20mm x 6.00mm) and maximum seated height of 0.150" (3.80mm).

Q: Can these parts be used interchangeably on the same PCB?

A: Yes. Identical package, mounting type, and footprint specifications ensure mechanical and electrical interchangeability on the same printed circuit board assembly.