T95R226M050HSSL Equivalent & Substitute Parts

Part Overview

The T95R226M050HSSL is a 22 µF conformal coated tantalum capacitor manufactured by Vishay Sprague, rated for 50 V operation in a 2824 (7260 Metric) surface mount package. This component is part of the TANTAMOUNT™ T95 series and maintains Active product status. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are required due to inventory constraints, packaging format preferences, or specific compliance requirements.

Substiute Parts

T95R226M050HSSL

Vishay SpragueIn Stock: 1107T95R226M050HSSL Datasheet

Current PartRFQ

T95R226K050LSAL

Vishay SpragueIn Stock: 1000210T95R226K050LSAL Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the T95R226M050HSSL is determined by strict adherence to the following parameters:

• Capacitance Value: Must be 22 µF (no deviation)
• Voltage Rating: Must be 50 V (no deviation)
• Package / Case: Must be 2824 (7260 Metric) (no deviation)
• Mounting Type: Must be Surface Mount (no deviation)
• ESR: Must be 300 mOhm (no deviation)
• Operating Temperature Range: Must be -55°C to 125°C (no deviation)
• Type: Must be Conformal Coated (no deviation)

The identified substitute part T95R226K050LSAL meets all mandatory electrical and mechanical parameters. The primary difference is tolerance specification (±10% versus ±20%), which represents a tighter tolerance capability and does not preclude substitution. Packaging format variation (Cut Tape & Digi-Reel® versus Tape & Reel) is a logistics consideration and does not affect electrical or mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both the T95R226M050HSSL and T95R226K050LSAL are Active status components from the same manufacturer series with identical electrical and mechanical specifications. Selection between these parts should be based on the following factors:

RoHS Compliance: The T95R226M050HSSL is RoHS3 Compliant. The T95R226K050LSAL is RoHS non-compliant. Applications requiring RoHS3 compliance must use the main part number.

Tolerance Requirements: The T95R226K050LSAL provides ±10% tolerance versus ±20% for the main part. Applications with tighter capacitance tolerance specifications may benefit from the substitute part.

Packaging Format: The T95R226M050HSSL is supplied in Tape & Reel (TR) format. The T95R226K050LSAL is supplied in Cut Tape (CT) & Digi-Reel® format. Packaging selection depends on assembly line equipment and volume requirements.

Inventory Availability: The T95R226K050LSAL shows significantly higher inventory availability (1,000,100 pcs versus 1,081 pcs), which may influence lead time considerations.

Frequently Asked Questions (FAQ)

Q: Can T95R226K050LSAL be used as a direct replacement for T95R226M050HSSL?

A: Yes, from an electrical and mechanical standpoint. Both parts share identical capacitance (22 µF), voltage rating (50 V), ESR (300 mOhm), package dimensions (2824 / 7260 Metric), and operating temperature range (-55°C to 125°C). The primary consideration is RoHS compliance status; applications requiring RoHS3 compliance must use the main part number T95R226M050HSSL.

Q: What is the difference in tolerance between these parts?

A: The T95R226M050HSSL has ±20% tolerance, while the T95R226K050LSAL has ±10% tolerance. Both tolerances are acceptable for the same circuit applications unless the design specifically requires tighter capacitance accuracy.

Q: Are the physical dimensions identical?

A: Yes. Both parts use the 2824 (7260 Metric) package with dimensions of 0.283" L x 0.236" W (7.20mm x 6.00mm) and maximum seated height of 0.150" (3.80mm). They are mechanically interchangeable on PCBs designed for either part.

Q: What is the difference in packaging format?

A: The T95R226M050HSSL is supplied in Tape & Reel (TR) format, while the T95R226K050LSAL is supplied in Cut Tape (CT) & Digi-Reel® format. Both are surface mount compatible; packaging selection depends on assembly equipment and order quantity requirements.

Q: Are both parts suitable for high-reliability applications?

A: Yes. Both parts are rated for COTS (Commercial Off-The-Shelf) applications with High Reliability features and identical moisture sensitivity levels (2A, 4 Weeks). Both carry EAR99 export classification.