T95R107M025CSSS Equivalent & Substitute Parts

Part Overview

The T95R107M025CSSS is a 100 µF conformal coated tantalum capacitor manufactured by Vishay Sprague, rated for 25 V operation. This component belongs to the TANTAMOUNT™ T95 series and is designed for surface mount applications in the 2824 (7260 Metric) package. The part is currently active in production with high reliability ratings and ROHS3 compliance. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity.

Substiute Parts

T95R107M025CSSS

Vishay SpragueIn Stock: 915T95R107M025CSSS Datasheet

Current PartRFQ

T95R107M025ESSS

Vishay SpragueIn Stock: 1859T95R107M025ESSS Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the T95R107M025CSSS is determined by strict equivalence across the following critical parameters:

• Capacitance value: 100 µF
• Tolerance: ±20%
• Rated voltage: 25 V
• Type: Conformal Coated
• ESR: 200 mOhm
• Operating temperature range: -55°C to 125°C
• Mounting type: Surface Mount
• Package designation: 2824 (7260 Metric)
• Physical dimensions: 0.283" L x 0.236" W, height 0.150" maximum
• Moisture sensitivity level: 2A (4 Weeks)

The substitute part T95R107M025ESSS meets all electrical and mechanical parameters required for direct substitution. Both parts are manufactured by Vishay Sprague within the same TANTAMOUNT™ T95 series and share identical functional specifications.

Parameter Comparison

Engineering Selection Recommendations

Both T95R107M025CSSS and T95R107M025ESSS are functionally equivalent tantalum capacitors with identical electrical and mechanical specifications. Selection between these parts should be based on compliance requirements and regulatory constraints applicable to the end application.

The T95R107M025CSSS is ROHS3 compliant and is the preferred choice for applications subject to RoHS directives or where regulatory compliance with current environmental standards is required.

The T95R107M025ESSS is RoHS non-compliant and is suitable for applications where RoHS compliance is not a requirement. Both parts carry the same ECCN classification (EAR99) and HTSUS code (8532.21.0050).

Both parts are active products with high reliability ratings and are available in production quantities.

Frequently Asked Questions (FAQ)

Q: Can T95R107M025ESSS be used as a direct replacement for T95R107M025CSSS?

A: Yes, from an electrical and mechanical standpoint. Both parts share identical capacitance (100 µF), voltage rating (25 V), ESR (200 mOhm), operating temperature range (-55°C to 125°C), package dimensions (2824/7260 Metric), and all other functional parameters. The primary difference is RoHS compliance status. Substitution is valid only if RoHS compliance is not a regulatory requirement for your application.

Q: What is the significance of the RoHS compliance difference?

A: The T95R107M025CSSS is ROHS3 compliant, meeting current European Union Restriction of Hazardous Substances directives. The T95R107M025ESSS is RoHS non-compliant. If your application, end market, or supply chain requires RoHS certification, the T95R107M025CSSS must be used. If RoHS compliance is not applicable, either part may be selected based on availability and cost considerations.

Q: Are the physical dimensions identical between these parts?

A: Yes. Both parts use the 2824 (7260 Metric) package with dimensions of 0.283" L x 0.236" W (7.20 mm x 6.00 mm) and a maximum seated height of 0.150" (3.80 mm). They are mechanically interchangeable on PCB layouts designed for this package.

Q: What does the conformal coating provide?

A: Conformal coating is a protective layer applied to the capacitor that provides enhanced environmental protection, including improved moisture resistance and protection against contaminants. Both substitute parts feature this coating.

Q: Are there any differences in moisture sensitivity handling?

A: No. Both parts carry the same Moisture Sensitivity Level (MSL) rating of 2A with a 4-week floor life. Identical moisture control and storage procedures apply to both components.

Q: What is the difference between the part number suffixes (CSSS vs. ESSS)?

A: The suffix designates the specific manufacturing variant within the Vishay Sprague TANTAMOUNT™ T95 series. Both variants meet the same electrical and mechanical specifications for this 100 µF, 25 V application. The suffix does not indicate functional differences relevant to circuit performance.