T95R106M050CSSL Equivalent & Substitute Parts

Part Overview

The T95R106M050CSSL is a 10 µF conformal coated tantalum capacitor manufactured by Vishay Sprague, rated for 50 V operation in a 2824 (7260 Metric) surface mount package. This component is classified as Active product status and is designed for applications requiring high reliability in compact form factors. Substitute parts are identified when equivalent electrical performance can be maintained within the allowed parameter tolerances for this capacitor category, particularly when inventory availability or specific compliance requirements necessitate alternative sourcing.

Substiute Parts

T95R106M050CSSL

Vishay SpragueIn Stock: 926T95R106M050CSSL Datasheet

Current PartRFQ

T95R106K050LSAL

Vishay SpragueIn Stock: 1352T95R106K050LSAL Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the T95R106M050CSSL is determined by strict equivalence in the following parameters:

• Capacitance value: 10 µF (exact match required)
• Voltage rating: 50 V (exact match required)
• Package / Case: 2824 (7260 Metric) (exact match required)
• Mounting type: Surface Mount (exact match required)
• Type: Conformal Coated (exact match required)
• ESR: 500 mOhm (exact match required)
• Operating temperature range: -55°C to 125°C (exact match required)

Tolerance and compliance certifications may vary between the main part and substitutes without affecting functional interchangeability, provided all other parameters remain identical. The T95R106K050LSAL meets all substitution criteria with the exception of tolerance specification (±10% versus ±20%) and RoHS compliance status.

Parameter Comparison

Engineering Selection Recommendations

The T95R106K050LSAL is functionally equivalent to the T95R106M050CSSL for applications where the tighter tolerance specification (±10% versus ±20%) is acceptable or beneficial. Both parts maintain Active product status and identical electrical and mechanical characteristics.

Selection between these parts should be based on compliance requirements. The T95R106M050CSSL is RoHS3 compliant, while the T95R106K050LSAL is RoHS non-compliant. Applications subject to RoHS3 regulatory requirements must use the T95R106M050CSSL. For applications without RoHS3 mandates, the T95R106K050LSAL provides higher capacitance tolerance precision with greater current inventory availability (1332 Pcs versus 824 Pcs).

Frequently Asked Questions (FAQ)

Q: Can T95R106K050LSAL be used as a direct replacement for T95R106M050CSSL?

A: Yes, for applications where RoHS3 compliance is not required. Both parts share identical capacitance, voltage rating, package dimensions, ESR, and operating temperature range. The substitute has tighter tolerance (±10% versus ±20%), which is a functional improvement.

Q: What is the difference in tolerance between these parts?

A: The main part (T95R106M050CSSL) has ±20% tolerance, while the substitute (T95R106K050LSAL) has ±10% tolerance. Tighter tolerance means the capacitance value will be closer to the nominal 10 µF specification.

Q: Are the physical dimensions identical?

A: Yes. Both parts use the 2824 (7260 Metric) package with identical dimensions of 0.283" L x 0.236" W (7.20mm x 6.00mm) and maximum seated height of 0.150" (3.80mm).

Q: What is the impact of RoHS compliance difference?

A: The T95R106M050CSSL is RoHS3 compliant and must be used in applications subject to RoHS3 regulations. The T95R106K050LSAL is RoHS non-compliant and cannot be used in such applications.

Q: Do both parts have the same ESR specification?

A: Yes. Both parts have 500 mOhm ESR, ensuring equivalent electrical performance in high-frequency applications.

Q: What is the moisture sensitivity level for both parts?

A: Both parts are rated 2A (4 Weeks) moisture sensitivity level, requiring identical handling and storage protocols.