T8LXBYPQP Equivalent & Substitute Parts

Part Overview

The T8LXBYPQP is a diffuse optical sensor from Banner Engineering Corporation's T8 Series EZ-LIGHT product line. This 2-color gene sensor operates as a PNP output device with dual light sources (Blue LED and Yellow LED) for enhanced detection capabilities. The unit features IP67 ingress protection and operates across a wide temperature range of -40°C to 50°C.

This part is classified as obsolete. Locating equivalent or substitute components becomes necessary when inventory depletion occurs, when procurement lead times extend beyond project requirements, or when system redesigns necessitate component replacement with current-generation alternatives.

Substiute Parts

T8LXBYPQP

Banner Engineering CorporationIn Stock: 1113T8LXBYPQP Datasheet

Current PartRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the T8LXBYPQP optical sensor requires matching of critical electrical and mechanical parameters that define functional equivalence. The following parameters establish the substitution criteria:

Electrical Parameters:

• Supply voltage range: 10V ~ 30V
• Output configuration: PNP
• Response time: 1ms
• Light source type: Blue LED and Yellow LED dual-color capability

Mechanical and Environmental Parameters:

• Sensing method: Diffuse
• Ingress protection rating: IP67
• Operating temperature range: -40°C ~ 50°C
• Connection method: Connector
• Cable length: 78.74" (2m)

Compliance Parameters:

• REACH Status: REACH Unaffected
• Moisture Sensitivity Level: 1 (Unlimited)

Substitute parts must satisfy all listed parameters to ensure direct functional replacement without circuit modification or system redesign.

Parameter Comparison

No substitute parts have been provided in the input data. The comparison table cannot be populated without equivalent or alternative part numbers meeting the specified substitution criteria.

Engineering Selection Recommendations

The T8LXBYPQP is an obsolete product. When selecting replacement components, prioritize optical sensors that maintain identical electrical specifications (10V ~ 30V supply, PNP output, 1ms response time) and environmental ratings (IP67, -40°C to 50°C operating range).

Current-generation Banner Engineering optical sensors or equivalent diffuse sensors from qualified manufacturers meeting these exact parameters provide direct functional substitution. The REACH Unaffected status of the original part should be matched in replacement selections to maintain regulatory compliance.

The dual-color LED capability (Blue and Yellow) is a specific functional requirement. Replacement sensors must provide equivalent multi-color detection capability to maintain system performance.

Frequently Asked Questions (FAQ)

Q: What makes a part a valid substitute for the T8LXBYPQP?

A: A valid substitute must match all specified parameters: 10V ~ 30V supply voltage, PNP output configuration, 1ms response time, diffuse sensing method, dual-color LED light source (Blue and Yellow), IP67 ingress protection, -40°C to 50°C operating temperature range, connector-based connection, 2-meter cable length, and REACH Unaffected compliance status.

Q: Can I use a single-color LED sensor as a substitute?

A: No. The T8LXBYPQP features dual-color LED capability (Blue and Yellow). Substitutes must provide equivalent multi-color detection functionality to maintain system performance and application requirements.

Q: Does the connector type need to match exactly?

A: The input data specifies "Connector" as the connection method but does not provide detailed connector specifications. Mechanical compatibility with existing system connectors must be verified during component selection.

Q: Is the 2-meter cable length a critical substitution parameter?

A: Yes. The cable length of 78.74" (2m) is specified as a key parameter. Substitute sensors must provide equivalent cable length to ensure proper installation and system integration without additional cabling modifications.

Q: What is the significance of the MSL 1 (Unlimited) rating?

A: MSL 1 indicates unlimited moisture sensitivity level, meaning the component has no moisture-related storage or handling restrictions. Substitute parts should maintain this classification to avoid special storage or handling requirements.

Q: Can I substitute with a newer Banner Engineering T8 Series sensor?

A: Only if the newer model matches all specified electrical and mechanical parameters. Current-generation T8 Series sensors may differ in response time, output configuration, or light source specifications. Direct parameter comparison is required before substitution.