T8LXBXP Equivalent & Substitute Parts Reference

Part Overview

The T8LXBXP is a diffuse optical sensor from Banner Engineering Corporation's T8 Series EZ-LIGHT product line. This component functions as a PNP-output photoelectric sensor with blue LED illumination, designed for general-purpose object detection applications. The device operates across a 10V to 30V supply voltage range with a 1ms response time and IP67 ingress protection rating.

The T8LXBXP carries an obsolete product status. Locating functionally equivalent alternatives becomes necessary when procurement from original inventory becomes unavailable or when system redesigns require current-generation components with extended manufacturer support and availability.

Substiute Parts

T8LXBXP

Banner Engineering CorporationIn Stock: 823T8LXBXP Datasheet

Current PartRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the T8LXBXP must satisfy the following critical parameters to ensure functional compatibility:

Primary Matching Criteria:

• Sensing Method: Diffuse
• Output Configuration: PNP
• Light Source: Blue LED
• Voltage Supply Range: 10V ~ 30V (minimum requirement)
• Response Time: 1ms or faster
• Connection Method: Cable
• Ingress Protection: IP67 or higher
• Operating Temperature Range: Must encompass -40°C to 50°C or equivalent
• REACH Compliance: REACH Unaffected or compliant status

Substitute candidates must operate within the specified voltage window and maintain the same sensing principle (diffuse reflection detection). The PNP output configuration is essential for circuit compatibility with existing control systems. Cable-based connection and IP67 protection are mandatory for environmental and installation consistency.

Parameter Comparison

No substitute parts have been provided in the input data. The comparison table cannot be populated without specific alternative part numbers and their corresponding technical specifications.

Engineering Selection Recommendations

The T8LXBXP is classified as obsolete. When selecting replacement components, prioritize optical sensors that maintain identical electrical specifications and environmental ratings. The 10V to 30V supply voltage range, PNP output topology, and IP67 protection rating are non-negotiable parameters for direct substitution in existing installations.

REACH compliance status should be verified for new component selections to ensure regulatory alignment with current environmental standards. The 1ms response time establishes the maximum acceptable latency for substitute parts in time-sensitive detection applications.

Cable-based connectivity with 2-meter length is a standard configuration in the T8 Series. Substitute parts should maintain this connection methodology to minimize integration effort and ensure mechanical compatibility with existing mounting and routing infrastructure.

Frequently Asked Questions (FAQ)

Q: What defines a valid substitute for the T8LXBXP?

A: A valid substitute must be a diffuse optical sensor with PNP output, blue LED illumination, 10V to 30V supply voltage capability, 1ms or faster response time, cable connection, IP67 ingress protection, and -40°C to 50°C operating temperature range.

Q: Can NPN output sensors replace the T8LXBXP?

A: No. The T8LXBXP features PNP output configuration. NPN sensors operate on different electrical principles and require different circuit integration. Output configuration must match exactly.

Q: Are there sensing distance specifications that affect substitution?

A: The sensing distance parameter is not provided in the technical data for the T8LXBXP. Substitute parts must match all other specified parameters. Sensing distance should be verified against application requirements independently.

Q: Can the T8LXBXP be replaced with a different light source color?

A: No. The blue LED light source is a defined characteristic. Substitute sensors must use blue LED illumination to maintain optical performance consistency and compatibility with target material reflectivity.

Q: What is the significance of the IP67 rating for substitution?

A: IP67 rating indicates dust-tight and temporary immersion protection. Substitute parts must maintain IP67 or higher ingress protection to ensure equivalent environmental durability and reliability in the original application environment.

Q: Does the 2-meter cable length affect substitution eligibility?

A: Cable length is a physical characteristic that affects installation routing and mounting. Substitute parts should maintain the 2-meter cable length for direct compatibility. Longer or shorter cables may require system redesign.

Q: Is REACH compliance mandatory for substitute selection?

A: REACH compliance status should be verified for new component selections. The T8LXBXP carries REACH Unaffected status. Substitute parts should maintain equivalent or compliant regulatory status.