T8LBRXP Equivalent & Substitute Parts Reference

Part Overview

The T8LBRXP is a diffuse optical sensor from Banner Engineering Corporation's T8 Series EZ-LIGHT product line. This 2-color gene sensor operates as a PNP output device with dual light sources (Blue LED and Red LED) for enhanced sensing capabilities. The unit features IP67 ingress protection and operates across a wide temperature range of -40°C to 50°C with a 2-meter cable connection.

The T8LBRXP is classified as an obsolete product. Locating equivalent or substitute components becomes necessary when original inventory is depleted, when long-term supply chain continuity is required, or when system redesigns necessitate component replacement with current-generation alternatives.

Substiute Parts

T8LBRXP

Banner Engineering CorporationIn Stock: 953T8LBRXP Datasheet

Current PartRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the T8LBRXP optical sensor is determined by strict alignment of the following critical parameters:

Electrical Compatibility Parameters:

• Supply voltage range: 10V ~ 30V
• Output configuration: PNP
• Response time: 1ms

Optical & Functional Parameters:

• Sensing method: Diffuse
• Light source type: Blue LED and Red LED dual-color capability
• Ingress protection rating: IP67

Physical & Environmental Parameters:

• Connection method: Cable
• Cable length: 78.74" (2m)
• Operating temperature range: -40°C ~ 50°C
• Moisture sensitivity level: MSL 1 (Unlimited)

Regulatory & Compliance Parameters:

• REACH status: REACH Unaffected

A substitute component must satisfy all parameters within these categories to ensure functional and mechanical compatibility with existing system designs and installations.

Parameter Comparison

No substitute parts have been provided in the input data. The comparison table cannot be populated without equivalent or alternative component specifications.

Engineering Selection Recommendations

The T8LBRXP is an obsolete product. Component selection for replacement applications must prioritize current-generation optical sensors that maintain electrical and mechanical parameter equivalence.

When evaluating alternative components, the following criteria apply:

Compliance Considerations:

• REACH compliance status must be documented for the substitute component
• Moisture sensitivity level must be MSL 1 or equivalent to ensure handling and storage compatibility

Product Status Implications:

• Obsolete status indicates discontinued manufacturing and limited availability
• Long-term supply chain planning should account for the absence of future inventory replenishment
• Current-generation alternatives from Banner Engineering Corporation or equivalent manufacturers should be evaluated for new designs or system upgrades

Functional Continuity:

• Substitute components must support dual-color LED sensing (Blue and Red) to maintain application-specific detection capabilities
• PNP output configuration must be preserved for circuit compatibility
• Cable-based connection with 2-meter length must be maintained unless system redesign is acceptable

Frequently Asked Questions (FAQ)

Q: What makes the T8LBRXP obsolete, and why should I consider substitutes?

A: The T8LBRXP is classified as an obsolete product by Banner Engineering Corporation, indicating it is no longer in active production. Substitute components become necessary when existing inventory is exhausted or when system maintenance requires component replacement. Current-generation alternatives provide continued support and availability.

Q: What are the critical parameters that a substitute optical sensor must match?

A: A substitute must match the following parameters: diffuse sensing method, PNP output configuration, dual-color Blue and Red LED light sources, 10V to 30V supply voltage range, 1ms response time, IP67 ingress protection, cable connection with 78.74" (2m) length, -40°C to 50°C operating temperature range, and MSL 1 moisture sensitivity level.

Q: Can I use a single-color LED sensor as a substitute for the T8LBRXP?

A: No. The T8LBRXP features dual-color LED capability (Blue and Red). A substitute must provide equivalent dual-color sensing functionality to maintain application-specific detection performance.

Q: Does the cable length need to be exactly 2 meters?

A: The T8LBRXP is specified with a 78.74" (2m) cable length. Substitute components must maintain this cable length specification unless system redesign accommodates alternative lengths.

Q: What is the significance of the MSL 1 rating?

A: MSL 1 (Moisture Sensitivity Level 1) indicates unlimited shelf life with no moisture-related storage restrictions. Substitute components must maintain MSL 1 or equivalent rating to ensure compatibility with standard handling and storage procedures.

Q: Is REACH compliance required for substitute components?

A: The T8LBRXP carries REACH Unaffected status. Substitute components should maintain equivalent REACH compliance documentation to ensure regulatory alignment in applicable markets.

Q: Can I substitute a PNP sensor with an NPN output sensor?

A: No. The T8LBRXP is specified with PNP output configuration. Output type directly affects circuit integration and cannot be changed without system redesign. Substitute components must maintain PNP output configuration.

Q: What voltage range must a substitute sensor support?

A: The T8LBRXP operates on 10V to 30V supply voltage. Substitute components must support this voltage range to ensure compatibility with existing power supply systems.