Equivalent & Substitute Parts for T356F336K010AS

Part Overview

The T356F336K010AS is a 33 µF conformal coated tantalum capacitor manufactured by KEMET, rated for 10 V operation in a radial through-hole package. This component belongs to the T356 UltraDip II series and is classified as active product status. The part is designed for general-purpose applications requiring reliable energy storage in compact form factors.

Identifying equivalent and substitute parts is necessary when the primary part number becomes unavailable, when inventory constraints require alternative sourcing, or when design requirements permit selection from qualified alternatives that maintain identical electrical and mechanical specifications.

Substiute Parts

T356F336K010AS

KEMETIn Stock: 1016T356F336K010AS Datasheet

Current PartRFQ

T356F336K010AT

KEMETIn Stock: 1408T356F336K010AT Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the T356F336K010AS is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part must satisfy the following criteria:

Electrical Parameters (Must Match Exactly):

• Capacitance: 33 µF
• Voltage Rating: 10 V
• Tolerance: ±10%
• Type: Conformal Coated
• ESR: 2.1 Ohm
• Operating Temperature Range: -55°C to 125°C

Mechanical Parameters (Must Match Exactly):

• Mounting Type: Through Hole
• Package / Case: Radial
• Diameter: 0.236" (6.00mm)
• Height: 0.441" (11.20mm)
• Lead Spacing: 0.200" (5.08mm)
• Manufacturer Size Code: F

The T356F336K010AT qualifies as a direct substitute because it maintains identical electrical and mechanical specifications across all parameters listed above. The primary distinction between these parts is compliance status, which does not affect functional equivalence in applications where either compliance level is acceptable.

Parameter Comparison

Engineering Selection Recommendations

Both T356F336K010AS and T356F336K010AT are active products from KEMET's T356 UltraDip II series and are functionally equivalent for circuit applications. Selection between these parts should be based on regulatory and compliance requirements applicable to the end application.

T356F336K010AS is appropriate for applications where RoHS non-compliance is acceptable or where legacy component specifications are required.

T356F336K010AT is appropriate for applications subject to RoHS3 compliance requirements or where ROHS3-compliant components are mandated by design specifications or procurement standards.

Both parts maintain identical electrical performance, thermal characteristics, and mechanical compatibility. The choice between them does not affect circuit functionality, reliability, or performance metrics.

Frequently Asked Questions (FAQ)

Q: Can T356F336K010AT be used as a direct replacement for T356F336K010AS in existing designs?

A: Yes. Both parts are electrically and mechanically identical. The T356F336K010AT can be substituted directly into any circuit designed for the T356F336K010AS without modification to PCB layout, schematic, or component placement.

Q: What is the difference between these two part numbers?

A: The primary difference is RoHS compliance status. The T356F336K010AS is RoHS non-compliant, while the T356F336K010AT is ROHS3 compliant. All electrical specifications, mechanical dimensions, and performance characteristics are identical.

Q: Are the physical dimensions identical between these parts?

A: Yes. Both parts share identical radial package dimensions: 0.236" diameter (6.00mm), 0.441" maximum seated height (11.20mm), and 0.200" lead spacing (5.08mm). They are mechanically interchangeable on PCBs designed for either part number.

Q: Do these parts have the same ESR and operating temperature range?

A: Yes. Both parts have 2.1 Ohm ESR and operate across the identical temperature range of -55°C to 125°C. Electrical performance is equivalent.

Q: Which part should be selected for new designs?

A: Selection depends on regulatory requirements. For applications requiring RoHS3 compliance, select T356F336K010AT. For applications without RoHS compliance requirements, either part is acceptable based on availability and procurement constraints.