Equivalent & Substitute Parts for T322D336K010AS

Part Overview

The T322D336K010AS is a 33 µF molded tantalum capacitor manufactured by KEMET, rated for 10 V with axial through-hole mounting. This component is classified as Active product status and serves general-purpose applications requiring stable capacitance in compact form factors. The part is RoHS non-compliant, which may necessitate identification of compliant alternatives for applications subject to RoHS3 regulations or procurement policies requiring REACH compliance documentation.

Substiute Parts

T322D336K010AS

KEMETIn Stock: 778T322D336K010AS Datasheet

Current PartRFQ

T322D336K010AT

KEMETIn Stock: 1333T322D336K010AT Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the T322D336K010AS is determined by strict equivalence across the following critical parameters:

• Capacitance Value: 33 µF (exact match required)
• Tolerance: ±10% (exact match required)
• Voltage Rating: 10 V (exact match required)
• ESR: 2.1 Ohm (exact match required)
• Operating Temperature Range: -55°C to 125°C (exact match required)
• Mounting Type: Through Hole (exact match required)
• Package Type: Axial (exact match required)
• Physical Dimensions: 0.180" Dia x 0.420" L (exact match required)
• Manufacturer Series: T322 (exact match required)

The substitute part T322D336K010AT meets all electrical and mechanical parameters identically to the main part. The primary distinction between these parts is regulatory compliance status: T322D336K010AT is RoHS3 compliant, whereas T322D336K010AS is RoHS non-compliant.

Parameter Comparison

Engineering Selection Recommendations

T322D336K010AS is suitable for applications where RoHS non-compliance is acceptable or where legacy component specifications are required. This part maintains Active product status with established supply availability.

T322D336K010AT is the direct equivalent for applications requiring RoHS3 compliance. Both parts are manufactured by KEMET within the T322 series and deliver identical electrical performance and physical form factor. Selection between these parts should be based on regulatory requirements applicable to the end application and procurement policies governing component selection.

Both parts carry REACH Unaffected status and are classified under ECCN EAR99 for export control purposes.

Frequently Asked Questions (FAQ)

Q: Can T322D336K010AT be used as a direct replacement for T322D336K010AS?

A: Yes. T322D336K010AT is electrically and mechanically equivalent to T322D336K010AS. All critical parameters including capacitance, voltage rating, ESR, operating temperature range, and physical dimensions are identical. The parts differ only in RoHS compliance status.

Q: What is the difference between these two part numbers?

A: The primary difference is regulatory compliance. T322D336K010AS is RoHS non-compliant, while T322D336K010AT is RoHS3 compliant. Both parts are manufactured by KEMET and share identical electrical specifications and physical packaging.

Q: Are the physical dimensions identical between T322D336K010AS and T322D336K010AT?

A: Yes. Both parts measure 0.180" diameter by 0.420" length (4.57mm x 10.67mm) and use axial through-hole mounting. They are mechanically interchangeable.

Q: Which part should I select for new designs?

A: Selection depends on regulatory requirements. For applications subject to RoHS3 regulations or procurement policies requiring RoHS compliance, specify T322D336K010AT. For applications without RoHS compliance requirements, either part is acceptable based on availability and cost considerations.

Q: Do these parts have the same ESR characteristics?

A: Yes. Both T322D336K010AS and T322D336K010AT have an ESR of 2.1 Ohm, ensuring identical performance in circuits sensitive to equivalent series resistance.

Q: Are both parts currently in production?

A: Yes. Both parts maintain Active product status with KEMET. T322D336K010AT has higher documented inventory availability (1282 pcs) compared to T322D336K010AS (692 pcs).