Equivalent & Substitute Parts for T3008-12SC1

Part Overview

The T3008-12SC1 is a snap action switch manufactured by Omron Automation and Safety, configured as a 2NC/1NO (two normally closed, one normally open) contact arrangement with 90-degree actuator orientation. This component is classified as obsolete, necessitating identification of functionally equivalent alternatives for ongoing system maintenance and new design implementations. The substitute parts D4GS-N3R and D4GS-N3T provide equivalent switching functionality within the Omron product portfolio.

Substiute Parts

T3008-12SC1

Omron Automation and SafetyIn Stock: 831T3008-12SC1 Datasheet

Current PartRFQ

D4GS-N3R

Omron Automation and SafetyIn Stock: 1255D4GS-N3R Datasheet

SimilarRFQ

D4GS-N3T

Omron Automation and SafetyIn Stock: 1147D4GS-N3T Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete T3008-12SC1 is based on the following critical parameters:

• Circuit configuration: 3PST-2NC/1NO contact arrangement
• Current rating: 750mA AC
• Voltage rating: 240VAC
• Moisture sensitivity level: MSL 1 (Unlimited)
• Actuator type: Panel disconnect mechanism
• Termination style: Cable leads with 1m cable length
• Environmental protection: IP67 rating (dust tight, waterproof)
• Operating temperature range: -30°C to 70°C

Both D4GS-N3R and D4GS-N3T meet these electrical and mechanical parameters, establishing them as valid equivalents for the discontinued T3008-12SC1.

Parameter Comparison

Engineering Selection Recommendations

Both D4GS-N3R and D4GS-N3T are active production components from Omron Automation and Safety and serve as direct functional equivalents to the obsolete T3008-12SC1. Selection between the two substitute parts should be based on RoHS compliance requirements: D4GS-N3R meets ROHS3 Compliant status, while D4GS-N3T meets RoHS Compliant status. Both parts carry identical electrical ratings, mechanical specifications, and environmental certifications (CCC, CE, cULus, TUV). Current inventory availability is 1181 pcs for D4GS-N3R and 1081 pcs for D4GS-N3T, ensuring supply continuity for replacement and new applications.

Frequently Asked Questions (FAQ)

Q: Can D4GS-N3R and D4GS-N3T be used interchangeably with T3008-12SC1?

A: Yes. Both substitute parts provide equivalent circuit configuration (3PST-2NC/1NO), current rating (750mA AC), voltage rating (240VAC), and environmental protection (IP67). The primary difference is RoHS compliance level; select based on your application requirements.

Q: What is the difference between D4GS-N3R and D4GS-N3T?

A: Both parts are functionally identical with matching electrical and mechanical specifications. The distinction is RoHS certification: D4GS-N3R is ROHS3 Compliant, while D4GS-N3T is RoHS Compliant. Choose based on your regulatory or procurement requirements.

Q: Are there packaging differences between the main part and substitutes?

A: The T3008-12SC1 packaging is not specified in available documentation. Both D4GS-N3R and D4GS-N3T are supplied in bulk packaging with cable leads and 1m cable length as standard configuration.

Q: What certifications apply to the substitute parts?

A: Both D4GS-N3R and D4GS-N3T carry CCC, CE, cULus, and TUV approvals, meeting international safety and compliance standards for industrial switching applications.

Q: Is the operating temperature range suitable for my application?

A: Both substitute parts operate across -30°C to 70°C, providing standard industrial temperature coverage. Verify this range matches your specific application requirements before final selection.