Equivalent & Substitute Parts for T3008-11SC1

Part Overview

The T3008-11SC1 is an Omron Automation and Safety snap action switch with 1NO/1NC configuration and 90-degree actuator orientation. This component is classified as obsolete, necessitating identification of functionally equivalent alternatives for ongoing system maintenance and new designs. The substitute parts D4GS-N1T and D4GS-N1R are active Omron products from the D4GS-N series that provide equivalent switching functionality with enhanced environmental protection ratings.

Substiute Parts

T3008-11SC1

Omron Automation and SafetyIn Stock: 819T3008-11SC1 Datasheet

Current PartRFQ

D4GS-N1R

Omron Automation and SafetyIn Stock: 1104D4GS-N1R Datasheet

SimilarRFQ

D4GS-N1T

Omron Automation and SafetyIn Stock: 746D4GS-N1T Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The D4GS-N1T and D4GS-N1R are classified as equivalent substitutes based on the following criteria:

• Both parts maintain DPST-NO/NC circuit configuration, providing the same switching capability as the 1NO/1NC original specification
• Both are manufactured by Omron Automation and Safety, ensuring design and quality consistency
• Both feature identical current rating (750mA AC) and voltage rating (240VAC)
• Both share identical holding force (6kgf) and actuator type (Panel Disconnect)
• Both include cable leads termination with 1m cable length
• Both provide IP67 ingress protection (Dust Tight, Waterproof)
• Both are ROHS3 compliant and REACH affected
• Both operate across the same temperature range (-30°C to 70°C)
• Both carry equivalent approval certifications (CCC, CE, cULus, TUV)

Parameter Comparison

Engineering Selection Recommendations

Both D4GS-N1T and D4GS-N1R are suitable replacements for the obsolete T3008-11SC1. Selection between the two substitute parts should be based on inventory availability and project lead time requirements. D4GS-N1R offers higher current inventory (1062 units) compared to D4GS-N1T (665 units). Both parts carry identical electrical specifications, environmental ratings, and regulatory certifications. The active product status of both substitutes ensures long-term availability and continued manufacturer support, addressing the obsolescence of the original component.

Frequently Asked Questions (FAQ)

Q: What makes D4GS-N1T and D4GS-N1R equivalent to T3008-11SC1?

A: Both substitute parts provide DPST-NO/NC switching configuration equivalent to the original 1NO/1NC specification. They share identical current and voltage ratings, holding force, operating temperature range, and regulatory certifications from Omron Automation and Safety.

Q: Are there any differences between D4GS-N1T and D4GS-N1R?

A: Both parts are electrically and mechanically identical. The only distinction is inventory availability, with D4GS-N1R currently stocked at higher quantities (1062 units versus 665 units).

Q: What is the packaging configuration for the substitute parts?

A: Both D4GS-N1T and D4GS-N1R are supplied in bulk packaging with cable leads termination and 1-meter cable length.

Q: Do the substitute parts meet the same environmental and compliance standards?

A: Yes. Both D4GS-N1T and D4GS-N1R are ROHS3 compliant, REACH affected, and carry CCC, CE, cULus, and TUV approvals. Both provide IP67 ingress protection rating.

Q: What is the operating temperature range for the substitute parts?

A: Both substitute parts operate across -30°C to 70°C, suitable for industrial control applications.