Equivalent & Substitute Parts for T3008-03F2C5

Part Overview

The T3008-03F2C5 is a snap action flex switch with 2 actuators manufactured by Omron Automation and Safety. This component is classified as obsolete, necessitating identification of equivalent substitute parts for ongoing system maintenance and new designs. The obsolete status requires engineers to transition to active alternative models that maintain functional compatibility within the specified electrical and mechanical parameters.

Substiute Parts

T3008-03F2C5

Omron Automation and SafetyIn Stock: 1098T3008-03F2C5 Datasheet

Current PartRFQ

D4GS-N4R-5

Omron Automation and SafetyIn Stock: 1269D4GS-N4R-5 Datasheet

SimilarRFQ

D4GS-N4T-5

Omron Automation and SafetyIn Stock: 713D4GS-N4T-5 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts D4GS-N4T-5 and D4GS-N4R-5 are identified as equivalent alternatives based on the following substitution criteria:

• Manufacturer alignment: Both substitutes are manufactured by Omron Automation and Safety
• Circuit configuration: Both substitutes feature 3PST-NC (Three Pole Single Throw - Normally Closed) circuit topology
• Electrical ratings: Both rated at 750mA AC and 240VAC
• Mechanical interface: Both utilize cable leads termination with 5m cable length
• Environmental protection: Both rated IP67 (Dust Tight, Waterproof)
• Operating temperature range: Both operate across -30°C to 70°C
• Regulatory compliance: Both hold CCC, CE, cULus, and TUV certifications
• Moisture sensitivity: Both classified as MSL 1 (Unlimited)
• ECCN classification: Both designated EAR99

Parameter Comparison

Engineering Selection Recommendations

Both D4GS-N4T-5 and D4GS-N4R-5 are active product alternatives suitable for replacing the obsolete T3008-03F2C5. Selection between the two substitutes should be based on the following factors:

D4GS-N4T-5 is RoHS Compliant and maintains active product status with 672 units in current inventory.

D4GS-N4R-5 is ROHS3 Compliant and maintains active product status with 1232 units in current inventory, providing greater stock availability.

Both parts satisfy identical electrical specifications (750mA AC, 240VAC), mechanical interfaces (cable leads, 5m length), environmental ratings (IP67, -30°C to 70°C), and regulatory certifications (CCC, CE, cULus, TUV). The choice between these substitutes may be determined by RoHS compliance requirements specific to the application and supply chain availability.

Frequently Asked Questions (FAQ)

Q: Why is the T3008-03F2C5 being discontinued? A: The T3008-03F2C5 is classified as obsolete. The D4GS-N4T-5 and D4GS-N4R-5 represent the current active alternatives from Omron Automation and Safety that maintain functional equivalence.

Q: Are D4GS-N4T-5 and D4GS-N4R-5 electrically interchangeable with T3008-03F2C5? A: Both substitutes share identical circuit configuration (3PST-NC), current rating (750mA AC), voltage rating (240VAC), holding force (6kgf), and operating temperature range (-30°C to 70°C), establishing electrical compatibility within the specified parameters.

Q: What is the difference between D4GS-N4T-5 and D4GS-N4R-5? A: The primary documented difference is RoHS compliance status: D4GS-N4T-5 is RoHS Compliant, while D4GS-N4R-5 is ROHS3 Compliant. Both maintain identical electrical and mechanical specifications.

Q: Do both substitutes have the same packaging and termination? A: Yes. Both D4GS-N4T-5 and D4GS-N4R-5 feature bulk packaging, cable leads termination, and 5m cable length.

Q: Are both substitutes certified for the same regulatory standards? A: Yes. Both substitutes hold CCC, CE, cULus, and TUV certifications, matching the approval requirements of the original component.

Q: What is the inventory status for these substitutes? A: D4GS-N4T-5 has 672 units in stock. D4GS-N4R-5 has 1232 units in stock. Both are available as new original components.