T201MHZGE Toggle Switch DPDT Equivalent & Substitute Parts

Part Overview

The T201MHZGE is an active-status toggle switch manufactured by C&K, configured as a Double Pole Double Throw (DPDT) switch with On-On functionality. This panel-mount component is rated for 3A at 120V AC and 28V DC, featuring solder lug termination and epoxy-sealed terminals. The part is actively produced and stocked, with 914 units available in inventory. Substitute parts are identified when equivalent electrical ratings, mechanical compatibility, and functional specifications align with the original component, enabling direct replacement in applications where component availability or supply chain requirements necessitate alternative sourcing.

Substiute Parts

T201MHZGE

C&KIn Stock: 1024T201MHZGE Datasheet

Current PartRFQ

200MDP1T1B1M1QEH

E-SwitchIn Stock: 1730200MDP1T1B1M1QEH Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the T201MHZGE is determined by strict alignment of the following critical parameters:

• Electrical Equivalence: Identical circuit configuration (DPDT), switch function (On-On), current rating (3A AC/DC), and voltage ratings (120V AC / 28V DC)
• Mechanical Compatibility: Matching panel cutout dimensions (Circular - 4.95mm Dia), bushing thread specification (10-48), and termination style (Solder Lug)
• Environmental Specifications: Operating temperature range (-30°C ~ 85°C) and moisture sensitivity level (MSL 1 - Unlimited)
• Regulatory Compliance: ROHS3 compliance and ECCN classification (EAR99)

The identified substitute part 200MDP1T1B1M1QEH from E-Switch meets all mandatory electrical and mechanical parameters. Variations in actuator length (9.40mm vs. 5.44mm) and electrical life rating (30,000 vs. 60,000 cycles) do not preclude substitution when panel mounting geometry and electrical performance requirements are satisfied.

Parameter Comparison

Engineering Selection Recommendations

Both the T201MHZGE and 200MDP1T1B1M1QEH are active-status products with ROHS3 compliance and EAR99 classification, meeting current regulatory requirements for industrial and commercial applications. The T201MHZGE offers extended electrical life (60,000 cycles) and a shorter actuator profile (5.44mm), suitable for space-constrained panel designs. The 200MDP1T1B1M1QEH provides equivalent electrical performance with higher inventory availability (1685 units) and bulk packaging options. Selection between these components should be based on application-specific requirements for actuator engagement depth, cycle life expectations, and supply chain availability. Both components satisfy identical electrical load conditions and environmental operating parameters.

Frequently Asked Questions (FAQ)

Q: Can the 200MDP1T1B1M1QEH directly replace the T201MHZGE in existing applications?

A: Yes, provided that the actuator length difference (9.40mm vs. 5.44mm) does not conflict with panel thickness or mechanical clearance constraints. Both components share identical panel cutout dimensions (4.95mm Dia), bushing thread (10-48), and electrical ratings (3A, 120V AC / 28V DC).

Q: What is the significance of the electrical life rating difference?

A: The T201MHZGE is rated for 60,000 cycles while the 200MDP1T1B1M1QEH is rated for 30,000 cycles. This difference reflects expected mechanical durability under continuous switching operation. Applications requiring extended cycle life should prioritize the T201MHZGE.

Q: Are there packaging differences between these parts?

A: Yes. The T201MHZGE is supplied in Tray packaging, while the 200MDP1T1B1M1QEH is supplied in Bulk packaging. Packaging selection may affect handling, storage, and integration into manufacturing workflows.

Q: Do both parts meet the same regulatory standards?

A: Yes. Both components are ROHS3 compliant and classified as EAR99 for export control purposes. The T201MHZGE is REACH Affected, while the 200MDP1T1B1M1QEH is REACH Unaffected. Verify REACH compliance requirements for your specific application and end-use region.

Q: What panel mounting considerations apply to both components?

A: Both components use identical panel cutout geometry (Circular - 4.95mm Dia) and 10-48 bushing thread specification. Installation procedures and panel preparation are equivalent. The primary consideration is actuator length clearance relative to panel thickness and adjacent components.